Hey Staytuned l made the changes you suggested going to give it a try tomorrow. I just dont under stand why leave all other limiters stock other than the two you suggested?
Type: Posts; User: maxchevy2004
Hey Staytuned l made the changes you suggested going to give it a try tomorrow. I just dont under stand why leave all other limiters stock other than the two you suggested?
I am trying to remove speedlimiter on my 2016 Duramax l have tried several ways but always end up with no throttle at all after the flash
I have 2006 F150 5.4 i am getting code P0016 truck runs fine. l need to pass rediness emissions with no codes test. l checked off no error reported for the P0016 code is gone. The issue l am having...
Eric which PCM do l select for the read on a 2016 Transit 250 3.7?
Anything in the works for the ford transit van is it worth taking a read sending info log?
Sorry l want to limit the speed in the truck to 115klm/hr so l think the value should be 31.94 m/s? In the speedlimiter section.
Looking for information on setting speedlimiter on a 2011 F250 6.2. I have set speed limiters on a couple GM. But on Ford the only area l see is VSS Limit ETC. l want the truck to go no faster than...
Is there a way around a locked PCM 2006 Duramax?
Thank You Chris for responding
I sent in my info log and file for a 2007 3.7 Nitro with no response from support?
Sorry 5FDP l think your google is wrong it is a DPF sensor just have figure out which one.
I keep getting a code P2454 on my 2007.5 Duramax does anyone one know which sensor this is in my exhaust?
Thank You
Should l do a CKP relearn after tuning a 1999 5.3 and installing a comp cam?
I have a 2009 Dodge Challenger 5.7. Looking to see what the procedure was for flashing? l looked it up in the help section could not see the 2009 Dodge Challenger 5.7?
I am looking for a base file for 1999 Ford 16v Zetech using the Perfect Power Stand Alone System or some one who has used the Perfect Power System
The HPT file flashed in no problem 100% did key cycle no start. Still waiting on tech support will keep you updated.
The file flashed in no issues 100% did the key cyle as asked on screen. l used the modified file l just posted. l tryed the original know that wont even flash in
l contacted support no response as of yet. Very strange it flashed no problem did key cycle yet know no start and wont even communicate with PCM flash or read. Battery is good I used HPT to flash...
Battery is good. l tried to re read it after l flashed it with the error message.
I just flashed a 2009 Ram 1500 5.7 flashed no problem did key cycle no start truck tryed re reading and flashing and will not re read or flash
l have a 2011 5.0 l switched out gas tanks from 98L to 138L I can not see where l can make changes so the gas gauge reads correct for the new larger tank?
Can l turn off P20B9 my truck 2013 LML has an issue and keeps going into limp mode. Dealer said 3 weeks for parts to come in
Could someone send me a stock clibration for a 1998 L31 5.7 or pm me Please Thanks
Thank You Jn2 i am curious if you set it to 35mph if it would still work?
2013 Ford Fusion 1.6 covered?