Since I got the MPVI2 and I noticed it says it supports TJs I thought I would poke around and see what it could do. I noticed under speedo->Calibration is has this Factor Max and Factor Min. Does...
Type: Posts; User: whatthekrapp
Since I got the MPVI2 and I noticed it says it supports TJs I thought I would poke around and see what it could do. I noticed under speedo->Calibration is has this Factor Max and Factor Min. Does...
P0101, P0102, and P0103 were already set that way but I will do the same for P0068 as well. The first one is P0016 - Crankshaft Position Correlation - Bank 1 Sensor A. I can't see any reason to set...
No luck. After loading the injector data from that file I am still reading lean in just about every cell past idle, even with VE numbers well over 100.
They did not. I had read they are pretty much rebranded Deka 60s and tried using data from LS1tech that I have attached. I was having similar issues when I tried that data about a month ago but now...
I have an 04 GTO with FAST 102 TB and intake, ported 243s, and FAST 60 lb injectors. I am concerned that I am missing something because even with my VE table increased by 40%, my wideband is reading...