i have the 60e to 80e adapter harness - the harness plugs into the transmission electrical connector.
Type: Posts; User: Swayc09
i have the 60e to 80e adapter harness - the harness plugs into the transmission electrical connector.
https://www.atechmotorsports.com/parts/BMM-118001BM
4L80e from summit
https://www.atechmotorsports.com/parts/BMM-118001BM
i already have the harness. the 4l80e doesn't have mounting points for the Neutral safety switch. so seeing if I need a new transmission or i can delete that.
mmmmmm what to do about the TCM then...
currently doing a 4l80e swap and noticed my trans doesn't have the provision for the Neutral safety switch. Am I able to delete that switch? also, i can use the OEM TCM to control the 4l80e with a...
did you submit a support ticket to HPT>
working on a 2020 nissan 370z and it doesnt have alot of table that i am seeing in older 370z cars.137002
any update or workaround? was on the dyno today and maxed it out with a 2007 Z06 ECS. there is no SD option.
I still need to maf tune quite a bit more
here is the mosrt recent tune and data log.
Yes thank you. I have changed all those tables already, I found the LNF guides and watched the control boost video. So all that is set to what cobalt overbooster uses. Boost feels a lot better.
...
Also I am at 5k feet above sea level with average DA of 7200
I appreciate any feedback, I am not use to fuel trims when WOT. I have been working on both that and the part throttle. I had .88 seeing ppl say the direct injection likes to run towards 12.8-13...
Good afternoon,
New to LNF Platform, i currently tune dodge and LS/LT V8s. My first factory turbo charged car.
I want to post some data logs and the tune to get som opinions on where i am going...
i repoll and select each PID and they do not read anything. i can only see coolant and MAP
Yeah i dont know what is happening.... it leans out bad.
I installed a zl1 pump with the vaproworx mexhnical kit and the new fpr. Now when i go wot the pressure gets to 10psi at about 5300 rpms. I added a kenne bell bap to the sustem and it helped the fuel...
i have not done anything with the wide band as it is inline with the o2 sensor readout. o2 sensor are showing rich as well. and i was under the impression aem doesn't need calibration. also with...
only 09.5 G8s have the 127 lb limit i believe. I just did injectors last night in my g8 and currently tuning as i have 90#.
So i tuned my own transmission when it was NA and didnt have any issues. Now i recently installed a LSA supercharger on the car and now when it shifts it will drop timing to negative and bounce...
Issue - when going WOT up to 100mph and I let off the throttle the transmission with shift from 4th to 5th then back to 4th gear again causing the transmission to what appears to be downshifting when...
i bought a used laptop for hp tuners and didnt realize vcm has issues with windows 8.... im currently having an issue where hp tuners is saying the usb is not connected to the laptop... now on my...