actually removed that post... not going to be posting here to help anyone anymore.. Think you guys are in good hands
Type: Posts; User: Bullet300
actually removed that post... not going to be posting here to help anyone anymore.. Think you guys are in good hands
See how you go with this.. Based on the tune you posted in your original post... Your tune needs work but this may solve your throttle issue.
142205
Shift shedule tuning would need to be adjusted i would imagine
Does anyone have a firm understanding of the IAT compensation settings? I thought I did until I dove down a rabbit hole of reading about it for a project I'm working on and there seems to be
a few...
First thing I do with cylinder misfire is change the coil to another location. This is the easiest thing to do and rules out a coil issue.
Just an FYI. I had a similar thing to this happen where one bank was lean the other rich. Turned out to be a failed coil pack.
https://youtu.be/aDSZhy551bo?si=otFGt3RgRgDcHd-g
Ok. I found the issue on my settup. I have removed the previous posts as I was on the wrong path. On my settup it turned out to be the converter lock up setting in 4th.
Hey mate. I don't normally jump onto this section. I have had great success with Southern Hotrod products. They supply there rebuild/ upgrade kits. Not sure on pricing these days.
I'm out of town at the moment but keen to discuss. Be back at my laptop in a few days.
Anymore on this? Anymore thoughts on strategy to deal with it?
So I have fixed this issue. One thing edcmat-l1 highlighted with his last comment was that I had l had deleted the software and re installed it but I had not deleted its sub folder. This sub folder...
I am fairly confident that I have been doing it correctly for the past 4+ years. But if doing what you suggested works I will be the first to admit it. Will let you know.
Thankyou. That definately is a good option for me to try
See how you bring yours up and you have the brekdown selection boxes.... Mine is blank.. Even when connected to the car with all my channels being logged.
Once again .... Your not helping.... It wont populate anything..... Even if i try and filter items i absolutely know i am logging or replicate a graph i already have populated that works. Not...
Yes in the channel list I have all my channels and can populate new channels if I need them. This is just when I try and bring them into a graph.
139271 I found this stock jpeg.. But nomatter what i type into that text box nothing populates. I have already raised a ticket with no reply as yet.
Your sarcasm isn't desired or needed... The fact that you posted that picture means you knew from my description EXACTLY what I was talking about..... And I am actually at work at the moment so don't...
As i said Graphs layout, New graph then the parameter selector..... Then nothing... The parameter selector box comes up and when you try to type in a parameter to input nothing populates at all.
Hi I'm having issues with my perameter selector not populating anything.
Just tried the Beta version. Same issue.
About a week ago when i go into VCM Scanner , Graphs layout, New graph then the perameter selector. Nothing comes up. It just suddenly happened. Happens connected from device or not. With every log...
Fired my car up with no issues with the supplied ID data.. Started and idled perfect. Once ut was running i had to pull 14% fuel from where i estimated for e85. Have trims within 5% now and just...
So I'm to understanding you deleted the skim in newer vehicles that have wcm module installed it just lays dormant. As soon as it is in contact with the car and try to start and registeres the wcm...