Search:

Is the only way to retrieve a data log from the MPVI Pro box to leave it connected to the vehicle and bring the laptop to the vehicle.
I want to just bring the little box in my office and hook it to...

Ok, so I found a blown fuse in the passenger floor panel, and for anybody else the code is C/LALDL and is fuse number 29. 10 amp

Update, I just plugged the cable into another vehicle and the power light comes on, so maybe I have a blown fuse for my OBD port? 2003 Z06 Corvette. Does anybody know where it's located?

Bill, I really wish you guys had a phone number for help. VERY AGGRAVATING.
I'm trying to figure out why my box lights don't come on. I checked all 16 pins for continuity on the supplied cable that...

is there a pin out diagram for the box end of the HP Tuners cable that goes from the OBD port to the HP Tuners box? Then I could check for voltage at the box end of the cable

Now I'm not getting any "power on" light on the HP Tuners box? The cig lighter power is good

Help, accidentally pulled 2 wires out of my MPVI Pro 8 pin connector. 1 is a ground that I put back in pin number 5.
Not sure where to put my AEM sensor lead, I can't tell from looking where it...

I have just put a LS7 in my 2003 Z06. I have a FAST 102 intake and a Nick Williams 102mm Throttle Body. The car has a Vararam Cold Air Intake that I installed when I first got the car.
I need new...

Thank you. Can you recommend someone that can email me a tune for a highly modified LS7

Will my MPVI Pro work on 2 different laptops