Search:

I will pull a 07 EZ EFI truck, 04.5 Diablo Truck, and a 04 Smarty Truck to see if it works out ok.

Thanks for the support.

Any issues reading and reloading previously tuned trucks? I know EFI Live had the issue in 06+ that would Brick the ECU. They created a repository and extra scan process to see if the truck needed a...

Just curious when the HPT "AutoCal" will be available.

Having the problem with mine too. Won't log in Hertz. Only Lb/min...

William Henn??

Greg,

Are you going to offer any classes on the C7 LT1 base platform? (Instructor Lead, or Book only?)

I would be interested if you would.. Im always open to further my education and know if...

Anyone figure this out?? Have and ECS car that does the same thing.... Only thing I noticed is the IATs at 4600rpm UP start to climb like crazy... 110*-210* @ 6000rpm

BTW my problem is with a 2011...

Got the stainless works put on a Auto C7... Made 388 Stock. Hopefully have it on the rollers soon with some good results. Just doing Headers and a Tune no CAI yet.

With the Auto I was shooting for 12.5 AFR, Manual was 12.7

Should have a Stainless Works LTs, OR-X pipe, CAI Manual in later this week

I noticed on a C7 I finished tuning this week that if the Engine-> TQM -> General -> PEAK Torque table isnt properly calibrated after adjusting the DD table the car will NOT enter V4 mode. I dont...

Any chance you could post the tune Magnuson sent? Id like to compare a few things on it

James,

How was the fitment and installation on the Kooks?

Did you still get some random case of false knock at all, about 5000-6200 rpm randomly?

91 octane

Both cars had less then 50 miles on them. I'm sure the more they break in there would be more gains

17-21 @ WOT

I had less timing in the manual c7 but got away with 20-21 on the auto

Finished the Auto C7 completely stock tune only on a MD1100 Mustang Dyno

386/384wtq SAE Stock

409/406wtq SAE tuned

Still getting some random KR that Im sure is false knock. Its not much...

Just got done with a stock drop in air filter on C7, First one Ive got my hands on... Manual M7..

Made 401/397 Stock on the MD1100 dyno

Tune was 422/419.


Im working my way through an...

Need Some Tech Quick!!! Email Sent

2013 Pullied ZR1 60th Anniv, and 2013 60th Anniv LPE660 C6 427 Vert.... EMAIL SENT

Anything new with this??? Have a customer wanting the speed limiter removed on his 2012 V6

Any chance at all of getting a Custom OS like COS5 on EFI Live for a Beta Update??

Alrighty! Thanks for the heads up so i can start saving for a smarty.

2004 Dodge 5.9L Cummins in the mix??? It would be nice to set Cold Temp High Idle and Adjust Tire size much like the smarty hand held do.

well if you for sure get a class going let me know!! I might be able to round up a few ppl from the Cornhusker state to make the long drive there if need be and weather permitting of course. Hell i...

yeah i think you were doing a Vortech supercharger setup on a C5Z then and i wanted Mole around i guess and see if i could piece a kit together or just get the Kenne Bell!!!

Anyways Bump for ya!!

VE = Volumetric Efficentcy or MAP sensor reading
MAF = Mass Air Flow or Maf sensor reading.

Probly two of the most important steps in tuning. With the turbo you could be running VERY Lean. I...

any chance of you visiting the midwest?? Nebraska, Kansas, Missouri, Iow, colorado, etc...???

Id really enjoy an advanced class. Or ill just have to keep bothering howard when i get stumped!!