Search:

Has anyone seen this?
I did a search on the entire forum and and got a big goose egg.
Definition is: "Supercharger Inlet Pressure Sensor Circuit Range/Performance Downstream of throttle valve"...

I too am looking for an answer to this query.

I've seen this on two cars as well (both 2010 Camaros, one being my own car) One day, every ABS related light in the dash was on and this was after...

THATS IT!
12592525

My guy just called me back to appologize for giving me the wrong #.
I came back to post it and you beat me to it ;)

I saw that thread, was just wondering if anything else had popped up since the DPE Corvette deal.

Bill, here is a 2009 ZR1 file ...

EDIT:
My guy tells me PN 12591290 is for a ZR1, LSA & SC...

I have seen this on a few cars now. It seems more previlant in the automatic cars. I think it may be due to the smaller tube diameter where you plug in the MAF. Basically you just trimmed your...

Good info.
Thanks Robin!

On that note ... does anyone know if there is a 2 bar sensor that plugs in to the 2010 harness?
I have the 12615136 Saturn BARO sensor but the plug is totally...

This may be a dumb question but ...
How do you "turn off the VE reference all together"? In a 2010 Camaro

Engine checks out fine. compression & leak were very good.

Got into some WOT last night. which raises more questions ... go figure.

The g/cyl go to 2.60s in the log but I dont have anything in...

I have a 2010 in my hands right now with a MAST 415ci engine and a D1SC on it. Stock pump with a BAP (and yes, the BAP works. I guess its a matter of where you wire it in). The guy had all the work...

DOH! :doh:
Thank you!
I knew it had to be there ... I just couldnt see the forest through the trees :D

I'm trying to put the 80lb/hr injectors in my 2010 Camaro and find myself a bit puzzled.

YES ... I bought Greg's DVD so I have his values however ... in the 2010 Camaro, the other axis it is on is...

Thanks for the ideas! I actually played with TM on & off and moving shift times up & down (all the way to 0 even). Maybe its just this car but turning the TM off didnt do any thing for the upshifts...

First off let me say that I have read a great deal on the recent threads in here and am very thankful to you guys for sharing your knowledge. I have been doing alot of trial & error on the latest...

This has been a great thread! I've learned a lot from it, Thank you guys!
I did a 2010 Camaro today L99 A-6. The engine worked out mint and I applied what I knew and what I learned here to the...

Where will I be able to find those "published values" and when do you think we can expect to see them?

Thanks in advance!

No, The stock LS3 is out of the car and sold already. I have a 427 built with a Warhawk block, Callies internals, the latest LS7 head from Cary (formerly of ETP) and a set of twins will be topping it...

Thanks for the info. I'm gonna have to get myself up to speed on that for sure. I'm looking for 700-800RWHP so I'm gonna need to change injectors for certian. I think thats where I'm gonna run into...

This is mainly directed at Chris & Kieth as I dont expect anyone else might have info regarding this yet:

OK ... so it seems that the PCM monitors and controls the fuel pump closer than we...

Thank you!:cheers:

Hey guys, Does anyone have a stock MAF transfer function for a 2002 Silverado w/ a "T" motor? I just need to start from scratch and dont have it on this particular vehicle.
Thanks in advance!

Thanks Bill! :cheers:

I am turning up the 07 ZO6. I just got the new block today and the rotating assembly is on the way. Cam is already here and blower has been upgraded.

To my knowledge, we still arent able to go SD...

The MAF is out of the vehicle. I DO have an IAT sensor. When i didnt, it was DEAD RICH.
To the best of my knowledge, the time delay for PE is zero-ed out. Thats just SOP on most of my tunes. Did...

The O2s are brand new.
I wasnt logging the A/Fs in HPT because I was looking at actual via the Dyno's ETAS meter. As for commanded, I thought thats what the values in the PE enrichment tables were...

OK ... after reading numerous threads, I found some tid bits to try and after turning a few things on and a few things off, the "injector fade" has left.
Next problem ... NO PE
I just made a light...