What ford is it out of?
Type: Posts; User: patrol_maverick
What ford is it out of?
Referring to the fuel & spark cut tables under the torque managment menu, What is TipIn limit/ TipOut limit/ TipIn Osc/ and Trans Trunc?
Does anyone have a good description for them? What do they...
What is tip in/ tip out?
I ended up putting a 3k resistor on the AT temp sensor circuit for the 5 speed and it solved the high speed fan thing.
It seems like that is the only option so far unfortunately
I think I finally figured out what causes the fans to run constantly while the engine is running.
It turned out to be the A/C pressure switch. I plugged one into the loom and its stopped the fans...
Yeah this is back on the ZF tune.
I've licensed 2 pcm's, so I want to get both working. The 5 speed seems to work ok so it's back on the shelf while I sort out the ZF one.
The ZF seemed to work...
I did the tables with 0 and 1, and the fmem. I did a 1/2 hour drive and it seems to be working good so far.
Should I 0 the Torque reduction RPM & Clip torque menu's under the Torque management tab...
Yeah the fans run constantly on the other tunes, but they only run on low speed which I can work around. The 5 speed switches both relays on so I can't work around it.
I didn't touch the torque...
At the moment the 5 speed works the best, but the thermo fans constantly run on high.
I also have the ZF pcm with auto enabled which no longer seems to have the 3500rpm limit, but it feels like it...
I had a play with the 5 speed pcm and got it drivable, but now it wants to shut down at 2000 rpm. Now I have 2 pcm's playing games :banghead:
That's not what I wanted to hear lol.
I tried setting up a 5 speed too but it shuts down like you said. And that's without disabling the auto.
I need some help trying to figure out why I'm hitting a limit of 3500 RPM (Engine conversion- FG 6-cylinder into a Nissan Patrol). It doesn't have the surging feeling you get with the rev limiter,...
No worries, I thought you ment it was part of HPtuners. I have the factory Ford software anyway.
I cant see where you are doing this from. Is there a hidden menu?
Have you got a screen shot?
Are you referring to the VSS source under the Speedo menu or something else?
What does an invalid checksum error message mean? Is the file corrupted or does it mean it's tuner locked?
Just curious what the purpose of the Torque module is, and what functions it handles?
What will be affected if I were to switch it off?
I've used an FG engine in an engine conversion and have been...
Ok cool, I'll give it a go.
So if it is not tuner locked is there any risk of my ecu/ sct unit becoming locked/ unusable if I simply do a read with HP?
My ECU is part of an engine conversion which sees offroad use, so it tends to get wet occasionally.
I'd like to make a backup ECU to keep in the car just incase something were to happen. I already...
I was thinking that, but the number scale seems too big. It goes to 60,000 so surely that's not rpm lol.
Thanks for the link.
It doesn't say what TSS means.
What is TSS from the RPM limit table?
68961
I've had HP for a while but I still consider myself to be new at this. Could someone please tell me what TSS stands for and its unit of measurement regarding RPM limits (attached screen shot).
Is...