Search:

Type: Posts; User: ZeroBoostBuick

Page 1 of 10 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    67

    The MAF curve looks very close to stock ?

    The MAF curve looks very close to stock ?
  2. Can you post your tune please ??

    Can you post your tune please ??
  3. Replies
    1
    Views
    159

    Maybe under the EDIT tab there is a Gear/tire...

    Maybe under the EDIT tab there is a Gear/tire wizard. You might have to input the circumference of the new tire.
  4. Replies
    17
    Views
    1,205

    You can test with E10 to be safe and if the...

    You can test with E10 to be safe and if the flexfuel sensor is reading the alcohol content in HPT than you can add just a bit of E85 and see if the sensor reports a higher alcohol content.
  5. Replies
    17
    Views
    1,205

    Your Cruze has a 6 speed trans. It's the 8 / 9...

    Your Cruze has a 6 speed trans. It's the 8 / 9 and 10 speed trans TCM's that are locked.
  6. Replies
    27
    Views
    1,120

    Like 5FDP said... Get your idle RPM up to at...

    Like 5FDP said... Get your idle RPM up to at least 900,.. sometimes even 1,000 rpm at idle is better.
    In open loop you'll always have a fluctuating idle AFR. Even in closed loop the afr will go up...
  7. Post your tune please. maybe someone can spot...

    Post your tune please. maybe someone can spot something and lead you in the right direction.
  8. Replies
    27
    Views
    1,120

    you can zero the IAT adder table. at idle and...

    you can zero the IAT adder table.

    at idle and cruising you should be in closed loop, and you adjust the maf curve to get the LTFT's as close to zero as possible.

    When accelerating, that's when...
  9. Sometimes you have to have internet connection...

    Sometimes you have to have internet connection and HPtuners will unlock the ecm remotely with out you even knowing. Can take up to 30 minutes.

    I read something to the sort.

    I couldn't read my...
  10. Replies
    4
    Views
    211

    Northstar maf kit from zzp. I think SLP used...

    Northstar maf kit from zzp.

    I think SLP used to sell a 85mm maf for the 3800 as well.
  11. Thanks mate. Appreciated. I concur, not...

    Thanks mate.
    Appreciated.

    I concur, not being able to upload to the repository breaks my heart.
  12. Replies
    4
    Views
    2,046

    Which Editor version are you using ??? Mine...

    Which Editor version are you using ???

    Mine 4.4.4 will not open your file
  13. Replies
    12
    Views
    859

    took a quick look into your tune and your high...

    took a quick look into your tune and your high idle rpm Timing is way too high. ECM might be fighting this high timing. but it doesn't explain why it's doing it when the engine is up to...
  14. Replies
    12
    Views
    859

    The IAC being a stepper motor has gears inside,...

    The IAC being a stepper motor has gears inside, and they're plastic. And little plastic teeth don't last forever.

    If you have any scans from before when it was working good, compare the MAF...
  15. Replies
    11
    Views
    855

    The wideband sensor in the scanner should be...

    The wideband sensor in the scanner should be called "WB EQ Ratio" and it will report in Lambda.
  16. Replies
    7
    Views
    1,181

    Post your tune so we may look through it, in case...

    Post your tune so we may look through it, in case you missed something.
  17. Replies
    12
    Views
    859

    The Idle Control Valve is probably worn or dirty...

    The Idle Control Valve is probably worn or dirty and is sticking.

    It's more common than you think on 3800 cars.
  18. Don't overlook the Regal. Sometimes you can...

    Don't overlook the Regal. Sometimes you can find a 1999-2005 with low miles in excellent shape because plenty of old folks owned them. They're not the prettiest, but they're a good sleeper.
  19. HP Tuners does not recommend having the laptop...

    HP Tuners does not recommend having the laptop plugged into the car. Especially when writing or downloading a tune.
  20. Replies
    12
    Views
    546

    Give ZZPerformance a call. If anyone knows...

    Give ZZPerformance a call. If anyone knows it's them.
  21. Replies
    11
    Views
    855

    You can't put a high number in the torque demand...

    You can't put a high number in the torque demand and other torque tables and hope it adds power.

    You can't overshoot torque tables.

    Can you post the stock file for comparison please ???
    ...
  22. Replies
    1
    Views
    166

    I'm not sure if this will help but here is a E77...

    I'm not sure if this will help but here is a E77 Caddy CTS 2009 stock file...

    96288
  23. HHR Transmission (auto or manual) will never work...

    HHR Transmission (auto or manual) will never work on a 00-04' Grand AM.

    Transmission electronics between 3800 Grand Prix / Regal / Impala etc... are the same as with the Grand AM 3.4 V6....
  24. The 3400 has the same ECM parameters as the 3800....

    The 3400 has the same ECM parameters as the 3800. So I assume the tuning would be very similar.
  25. Replies
    2
    Views
    163

    Are you using the latest VCM version ??? My...

    Are you using the latest VCM version ???

    My daily driver 2018 Regal is not on the supported list. And I couldn't download the stock tune either till they released a couple more newer VCM...
Results 1 to 25 of 234
Page 1 of 10 1 2 3 4