Search:

the owner said the cut off was like the original setting ... , i set the Cut Off at 6800 rpm and the resume cut off is at 6780 rpm ... he told me that now he is like stock 6800-6500
also when doing...

i still don t know what to do ..

maybe i have to write entire .. ?? i only did write calibration only .. :O

i m having problem with one 2010 Camaro SS ...
i did a tune on ti and a few week later it come back to the original tune .. ??
does someone know how to fix the issue .. ??

hi .. i fix thiat issue by changing the NW102 trottle for an 90MM 2005-2006 LS2 with the silver blade ..
those who have the gold blade won t fit ..

my Wb was wrong and it was something like 14.5-14.8 AFR in WOT ..
so when the boost was coming it was too lean and it was misfiering from 4000 to 7000 rpm..
now i added fuel it is simply...

i think i resolved the problem in this moment after a long focusing ( years of tuning ) .. it is a hardware issue..
for those who wants to know more about this you can email me at...

so it is impossible to tune a C5 corvette ...?? that what i have to understand..??

i think i ll begin to hate my car...!!

problem resolved .. was missing fuel at top end

i have the same problem than you ...
do you have resolve the problemm..?
if yes , i would like you to help me cause i m very confused
help would be great..

the button seem not to work all the time..
so it is for that reason that i want to turn it off

just would like to cancel traction control system in the tune ...

may be i m wrong but i ve deleted the p1571 dtc and set it to no error reported..
anyone help woulb be great... thks

i will check if it change something for my reduce power mode ...

ok thanks , so i set 27,2 for the tires size and 3,42 for the gear and commit the change and save it ...
will try it ..!!

hello , i would like to know how to change the tires size with hpt ,
i just bought some MT drag radial 2 on 295-55-17 , they are 27,2 inch dia and would like to change it in the tune..
:shrug:

ok i see an information in the hptune help files in the edit calibration detail
so i could not have access to a tune that has been locked
only the software that has locked it has access..

if i...

hi hpt i just would like to know if there is a place to lock the tune for the access or can i remove a lock to a tune for the access with hptuner
if yes , i would like to know how
thanks a lot...

the plugs are bpr7ef gap is .025-.027

hi , i would like to know if someone know something about the issue i m having around 6000rpm at 15 psi of boost..2.85 upper pulley
i got mifire in the intake around 5800-6000 rpm and it wont go...

ok i m YSi supercharged and i add a lot fuel in the ve table , 70 - 105 kpa in maf and it seem to be a lot better...
but now have problem with WOT taht is very lean..
try to multiply values in...

last week i send the car in a race shop and they tune my car in MAF 1bar but the car was in 2 bar SD
so the guy who did the tune put a 1 bar in it with the 2bar Map .. the car was running bad .. and...

try to post the log

i ll try to post the log

does someone as an idea ... i put the tune from when i was running N/A but nothing changed

here is the tune if it helps