yes, plugs are gapped to .25 or .28, its been a while I don't remember exactly, but they were gapped where everybody else gaps theirs with similar applications. I had the ignition higher, but on...
Type: Posts; User: bdaily50
yes, plugs are gapped to .25 or .28, its been a while I don't remember exactly, but they were gapped where everybody else gaps theirs with similar applications. I had the ignition higher, but on...
so, even with 110, still picks up some knock retard. I've gotta assume this is false, unless my spark table is wayyyy off. Car seems to be richer than commanded everywhere, so I don't believe it is...
got some vp110 to dump in. Will log with it and see how it looks.
yep, same here. says its part of a remote tuning network. whatever that means....
just a quick glance at ur log, uve got quite a bit of knock retard that is pulling a bunch of timing in spots. Definately need more work. If your on 87 try increasing octane or lowering timing in the...
Also, my MAF error graph is within 5.5 percent across the board. Should be even closer next time I log it.
Another update, took the advice on the pe and be tables, as well as smoothed out the maf to get rid of the peaks. Still picking up knock retard. Took 2 degrees of timing out of the area that was...
I've tried smoothing the maf table, but every time i smooth it and then datalog, it takes me right back to the jagged hell hole its at now. So i pretty much stopped smoothing it. The Maf is in the...
Still chasing issues. Any advice? I've cleaned up the timing tables a bit as well as lowered some spots, changed around the PE table so its not going full rich outside of boost. Still getting random...
odd that it wouldn't open for you. Im using the latest beta, maybe thats why? Not sure, it opens for me though. Yeah the timing table i just adjusted the wot table but im seeing now that i should go...
Hi guys, this is my first real tune. The car is a 2010 Camaro LS3/M6. It has a Huron Speed twin turbo kit with 58/62mm turbos, otherwise, the engine is stock. I'm tuning MAF only OL with PE enabled....
thats kinda what i figured i would do as well, if the tranny goes, ill just rebuild it tougher next time. So you basically have 100 percent tqm removed, since it didn't have any in your normal mode?
I guess it would kind of make sense if the performance mode was the only mode that enabled tm, as normally when you put it into tow/haul, you are pulling a trailer or have a heavy load in the bed. I...
Hi, I'm new here. I'm just getting into tuning my 06 sierra denali, and the first thing I want to focus on is tq management. I don't want to delete it all, as all i have is a corvette servo and would...