Search:

Type: Posts; User: SnakebiteSS

Search: Search took 0.00 seconds.

  1. Hey Kyle, thanks for the feedback. I am off 3-4...

    Hey Kyle, thanks for the feedback. I am off 3-4 at about 75-80mph. Only about 2 off at 40-55mph speeds. I know it?s a progressive rate.

    My understanding is the trans shifts ( normal driving...
  2. HP tuners offers the unlock service for Global B...

    HP tuners offers the unlock service for Global B ecm/tcms now and then allows us to change everything or a Dyno tune shop to change parameters etc.

    Thanks for the other replies everyone. I may...
  3. Adjusting Speedometer After Bigger Tires 2022 SIlverado Global B ECM E90

    Hey Guys,

    I'm looking at having my ECM unlocked on my 2022 refresh Silverado with the Global B e90 ECM i believe. My Trans shifts fine but speedometer is 3-4mph off and so is mileage, etc.


    ...
  4. 99759

    99759
  5. Ah I gotcha, if I post up my tune can you look at...

    Ah I gotcha, if I post up my tune can you look at my trans side if you have the time? There are changes to the shift patterns, tables, etc. And a little reduction of trans TQ mgmt.
  6. I'm also just getting into the 6l80 on my camaro,...

    I'm also just getting into the 6l80 on my camaro, so I am only doing this with small changes until I am a capable and confident tuner for the trans.
  7. Hey 5FDP, I have read a TON of your posts from...

    Hey 5FDP, I have read a TON of your posts from the recent years on this! I'm going to try to compile all the changes you have mentioned for the other parameters. I have found conflicting info from...
  8. 6L80 Camaro SS Shift Torque Factor Question

    Hey guys!

    I've read a couple guides that suggest that reducing the shift torque factor to a .7 ( to reduce TQ MGMT by 30% via calculation) or a .5 ( to reduce TQ mgmt by 50%).


    Is this...
  9. Removed Engine Torque Management and some torque adder tables on TCM side Plz Review

    Hey guys I have been learning a lot over the past few months by reading and talking to some friends with HP tuners.

    This is my first tune so please take a look and review if you have the time. I...
  10. Will do when I get a chance. I know the tables...

    Will do when I get a chance. I know the tables show on the engine side a limit of 280 ft lbs of torque and I know I'm making a good bit more than that lol dyno back in the summer I believe showed in...
  11. Removing ALL Torque Management on Engine Side OK?

    Hey guys,

    I've been really getting into HP tuners over the last several months. Ive seen several buddies turn off the TQ MGMT on the Engine side but leave it stock on the trans side. Is this okay...
  12. Got it hooked up to a good scanner, showing...

    Got it hooked up to a good scanner, showing stored codes p1153 and p1133 but it says failed to turn on the MIL. I know that is due to o2 sensors further down the exhaust and taking longer to heat up....
  13. Thank you all for the responses. I appreciate it!...

    Thank you all for the responses. I appreciate it!
    Is the dealer the only one that can see those service vehicle soon codes from the body control module or would like an oreilly auto scanner show...
  14. L99 Camaro SS concerns with tune from another guy with HP tuners

    Hello All,

    I just joined and I am purchasing the mpvi2 and I will be learning how to tune my car myself as I have had issues with other people/vendors tuning my cars in the past. I feel that my...
Results 1 to 14 of 15