Hey everyone! I'm back in the game. Lurker for the most part and paid Mike @ OST to tune my RIPPS supercharger '15 Challenger almost 4 years ago. I was picking up the basics of tuning back then. ...
Type: Posts; User: MSwezey
Hey everyone! I'm back in the game. Lurker for the most part and paid Mike @ OST to tune my RIPPS supercharger '15 Challenger almost 4 years ago. I was picking up the basics of tuning back then. ...
Just saying thanks to you gearheads figuring this stuff out to further improve HPTuners and help others out. Great community here.
And a shoutout to Mike @ OST for tuning my supercharged v6...
In excel, you can setup a formula to interpolate the values up to the ms that you're wanting to go up to.
You did the inverse table too right with those updated values?
From what I've seen around here and other sites. Timing being pulled doesn't always = real knock? Is that correct? Other tables in the tune can contribute to that right? I haven't read 1 for 1 that...
Monitoring real knock involves the ST and LT Knock values right along with the voltages of both knock sensors, yes? Then I am monitoring it.
They hit their thresholds per RPM during in the logs via...
72811
Here's what I'm logging currently.
Any in particular you would suggest? I'm logging quite a few already, just not shown.
Update: I got my injectors tuned within +- 3%
Now I'm experiencing knock. Spent 4 hours returning my top of the motor back to stock (injectors, plugs, and the entire air intake).
I logged...
So another member put out his fuel tables (same injectors as mine)
Here's the chart comparing them: http://imgur.com/qzWGNwL pretty big differences when looking at the numbers.
Also compared...
Currently no logging done. Just looking at the gauge during the runs.
I would assume it's working correctly as it ranges between 14.4 to 14.7 while crusing.
I'll need to figure out a serial...
caniggia,
What did you set your injector min pulse width to and did you edit the offsets?
I have the 298s as well.
So at WOT from 1st to just past 3rd gear. It's showing 10.3 AFR the entire time.
Okay cool, making sure I got the right. Being under under the Math section and putting a '/' in place of the '+' threw me off :P
I'm trying to set this up on my scanner. I don't see "STFT/LTFT(Math) parameter".
I see the following:
LTFT + STFT
Nothing with the '/' symbol in the Math section.
http://imgur.com/z6oWUbS
Just wanting some 2nd opinions on this log file and make sure I'm analyzing it correctly with everything I'm learning.
This is a new supercharged system I installed a week ago. This log file was...