Search:

I loaded in a whipple OS for my kit on my 2019 f150. For some reason no matter how many times I repole parameters in vcm scanner it will not log all my channels I am requesting. Anyone experience...

Is there anything in the file I need to bump up under fuel pump to get max effort out of this system when in wot conditions? If anyone has experience with this setup I'd appreciate the help!

126666

I'm having similar issue. Can't go about 40 50% throttle. Everything looks great in the file. Just won't go above 100kpa. Car will not build boost. 19 z06 SC. I keep going through the tune but...

Could use your help if possible. Can you email me or message me on here. [email protected]

I'm working on a 19 gt that i cant seem to get to shift where I am commanding. No matter how much i adjust it it just wont do what i want. Ive tried other things besides raising all the rpm limiters...

120

Ok thank you! I will get this loaded in asap.
There's so much injector data out there for 47lb injectors. I've seen 4 different ones so far. It's so confusing on which is right and what's not... ...

I think by me increasing this for cold start in the normal operating temp range it stayed with that Lambda for some reason. I didn't think it would matter once it enters closed loop but I guess it...

Anybody🙏🙏🙏

Mods - 1320 ported 18 manifold w/lockouts, long tube headers back, JLT intake, lu47lb inj, E85 only/Strictly

Question - I had this vehicle on dyno today. Car made decent power. 450hp 386tq. The...

So i just tried to just tune it strictly on E85. with stoich afr at 9.86. Commanded EQ in log is .82 and fuel trims are with in 2%. What in gods name is going on here!?!?! lol ughhh

Im having a weird issue with the flex tune. eq command idle is .9 , .85 lambda at idle and .80 to .86 cruising. In wot it doesn't change much. Car is acting like its strictly running off my WOT FFV...

Ok because im like, somebody better tell me something about this method now so i can throw these sd tables aside hahahahaha Ill get it dialed as best as possible as long as its safe im good with...

GOD!! I wish I could get that many cell hits. I'm doing this on the street until we finally buy a dyno. Which Id be done by now if i did because this weather is not on my side. I understand what you...

What will cylair anticipation exactly do being disabled beacause i actually have it disabled....?:banghead:
Heres my last log. And i know i have alot of histos lol. The bottom one is the one im...

Yep! thats exactly what im doing!

Thats weird that it would command disabled maps. Really weird how that is even possible. I want to give him back this car safe. To be honest from my data logs. My stft are not far away. Alot of spots...

yes. roush super charged with a bap and id1050. pushing around 12 psi-ish.

the last log i just sent you was with bank 1 and 2 bias tables zeroed out. I can not find Closed loop forward feed bias Bank 1/2

if you are referring to Maf adaption table# 2005, then yes its off.

you have to connect your mpv12 to the lap top for it to come up. I dont know why. its not locked

I can pm you my file. Yea im logging all that. Blow through is enable. As of now at this very second I am using stft with as my rpm column axis and calculated map as my row axis.
I did not touch...

I am currently doing the the speed density on this 20 gt roush map only. The file is not completely off fuel wise. Max percent stft wise is + - 4 to 6%. Some spots I was seeing 9, 12, and 14% but I...

Thank you mike! I never had a customer with a bap and I actually have a gen3 with bap and roush sc that I am doing for a very important guy in the car community this weekend so this should help me...