Thanks for the information! I will give that a try and see.
Type: Posts; User: TWSUPERDUTY
Thanks for the information! I will give that a try and see.
Also, I seen you had e85 tune. Do you have any problems with the throttle closing on top end say around 6600 rpm or more like closing down to 50-60 %? I do and just been trying to figure out how to...
First of all I will describe the car. It is a 2019 Mustang premium 5.0 10r80. Full exhaust, no cats, e85 flex fuel tune, CAI.
The 93 tune I wrote was spot on. Shifts great at 7400 and lambda is...
Let me know if that fixes the issue. If not I will look into a few more things that I changed by doing a file comparison to the stock file. But I did have the same issue for seemed like forever. ...
Try going to TRANSMISSION > General > Limits > Element RPM Limit. Max that table out and try it. Also, you might have to raise the Planatary, Ring Gear, Sun Gear, and Carrier Gear limits also. I...
What I ment was the limiters are set to 6400. But the actual commanded shift RPM is set to 5800
Any tips on rev limiter issue. It hits the rev limiter before every shift. I have lowered the WOT mph tremendously and the WOT rpm down to around 5800. Still hits the rev limit at 6400 before...
I will see if I can figure out a way to calibrate it for 40'' with forscan. I seen a way to calibrate it for 37 but not 40s yet anyways
Hello, Does anyone know how to calibrate the speedo gauge on the 2017+ superduty? I have tried the VCM Scanner but cannot find it. Will I have to purchase all 8 of the credits to change it? It now...