Search:

I am currently using an AEM 30-0310 and can read AFR but not Lambda. I have been using Goatropes set ups can use the Maths to and log MAF to see AFR % difference but no changes get me to Lambda. I...

Can anyone please tell where the GM Data Recorder is located and how to either change the settings or simply disable it. Apparently in 20056 the NTSB required auto manufacturers to record data in the...

I have tried 07GTS's method and could not see the a richer mixture at idle. I have tried the Inj Timing Tool method with similar results. What has worked so far is to add the Delta of New vs Stock...

Hello 07GTS I have followed the instructions you gave me awhile back which are the same as you stated in this post. I have struggled with finding the sweet spot. My cam data indicates the EVC is 397...

Kfred,
I am also in Vegas. I have a 12 Z with same setup as yours. I have been adjusting the timing like you but using 07gts's method using the boundary. I still have some low rpm hitching and am...

Thanks :-)

I have since changed cams to achieve more torque in the lower RPM ranges. I open road race the car and normally run in the 140 to 165 mph ranges for 90 to 120 miles. At 3600 in 6th the torque is...

I am asking for assistance in identifying and installing an alpha numeric OS or TPS/ RPM Op system for a 2012 Z06. I an fighting reversion in the 1k to 1.6 K rpm area. I have adjusted the timing and...

Thanks for the responses. You have kept me from wasting 2 credits :-)

Can anyone tell me if I apply the Speed Density Air Mode Patch listed in my E-38 Tune if a VE Table will appear without changing to the listed 2 Bar OS or am I stuck with either using the 2 bar OS...

Thanks for your reply. I will get on it and see how it turns out. :hi:

Please help me to understand the following. I have been reading how to eliminate "Trailer Hitching" for about 2 months on my 12 Z-06. I have been lead to Injector timing as the issue. To solve , I...

I originally posted to the end of that thread but no one replied so I tried again here.

Thanks to 07GTS, I received an answer after posted under timing assistance.
:yay: