Thanks for your reply.
Sent the ecu will not be a problem. if i get you the "OEM " map, can you check if this has the Alientech patch on it? because if it has it , we will still have the same...
Type: Posts; User: raulhp
Thanks for your reply.
Sent the ecu will not be a problem. if i get you the "OEM " map, can you check if this has the Alientech patch on it? because if it has it , we will still have the same...
Hello to all
I have a customer with a Jeep Wrangler 3.6 unlimited sahara 2017. This guy installed a lot of goodies on the car including a Supercharger.
this customer got the ecu to a local tuner...
Hello
i had your problems two years ago, if you read my post in the same forum (tuning F-type 3 liter v6) i got rise the boost (it is not only By pass valve demand) putting the lower pulley.
I...
Hi to all
can you log the knock or knock correction on a 2019 STI? i can not find these PID
thanks
Other thing i could see, at logging i can see really high water and intake temps...are not right, if i check in real time, the values are correct, water arround 85 and intake around 50, but if you...
Hello
i replied to your private email, as i told you there, the jaguar ecu is not the best point to learn ecu tuning or test, you can destroy your engine really fast, mainly when you have a very...
Ecuproject
the only way to see if you can rise the boost (remember, you have a supercharger, not a turbo, so boost comes from pulley size and rpm) is rising the torque demand and playing with the...
djyankees31
I spoke with the company who did the pulley, they use other system to tune the Jaguar Ecu, they told me that HP tuners gets may PIDs with wrong values, but it is not its problem, comes...
Yesterday i was testing with bigger changes in the tables. Good results.
I could see the boost rise from 0.8 bar to 1.3 bar. that is because you need rise the torque to load table, torque limits,...
hello
I tested today the car with the new pulley at WOT. I found that i dont have knock anymore.
but very disapointed because i could see the Boost is exactly the same as STOCK, i assume the...
Hi to all
I installed the new crank pulley, but before that i did a log. I could see the stock calibration retard about 2/4 degrees timing just when you push the throttle to 100%, around 3000rpm,...
i will install the pulley next week. i had a oil leak from the crankshaft grommed and it is in the workshop
I did the base map with the new limits and torque requests. Need install the pulley and do...
I will test my new Pulley in the Jaguar, anyone insteresting on results? HP tuners got me more limits tables to rise them and avoit limits. My crank pulley is for about 80HP more.
Car works with...
Hello,
I assume this question is simple but i didnt find an answer on the forum
i want do some test in a Jaguar F-type 3.0 supercharger, with a new crank pulley, a bigger one. It is a test mule...
I am also interested to see a tune file to understand what they changed.
I have a jaguar F-Type V6 with a smaller crank pulley and i want tune it, this will rise the power 100hp, so will be a lot.
...
The problem is we dont have any Jaguar specialist here, in Spain, no also jaguar specialist, even HP tuner specialist and that is the reason from my question. I am Engine calibrator for race cars...
Hello to all
i own a 2017 Jaguar F-type, i will install a Crank pulley to get more boost from my Supercharger. As i never tuned this car, and i didnt know how it works. I will be really pleased if...
Here you have?.
No, injectors are stock.
Minimum injector pulse is 1.2 ms and I have between 2,8 / 3.2 all time
sorry, i did not have any log saved, but o2 voltages were around 0.6 volts...
Hello to All
I'm Raul from Spain, I have a customer with a Corvette C6 (LS7) with high Cams and high compression piston. This customer send to US (yes the car, not the engine) to be tuned. THis...
Thanks
I found it just after wrote this post...i read it carefully and i will do what it says
Thanks again
hi again
My customer told me that drove for about 20min and the DTC came again, P1516...and no throttle at all. i lowered the m?ximum angle to 95% but still there...
Well, today i tested...if i go to DTC and put to no report...the car goes to limp mode again...but you couldn't see on the Scanner, you could delete them, but you could see them.
But...i tried...
i did not tested, will try for you, the owner ordered a new pedal and throttle motor