I ended up using an old sct device to data log with live link software.
Type: Posts; User: Nissmotion
I ended up using an old sct device to data log with live link software.
I have in the past few days tried logging just one PID using VCM scanner and it locks up my interface. I have to completely disconnect the MPVI2 and reconnect to even be able to communicate again. ...
There is currently known issues with eec-v scanning. A fix is in the works with not ETA. I personally datalog with an old SCT device and tune with Hptuners. Inefficient, but it gets the job done.
OK so, I've been racking my brain against this today. I ended up writing a basic tune using an SCT device inputting the data from the frpp website I linked in my original post. When instead of the...
Yes, this is a stock file that ONLY has the injector data entered as I interpreted it on the FRPP website.
I like these injectors as well. It has the crappy BBK fuel rails and a bigger fuel pump...
Before I install a another new set of plugs and change the oil in this 2002 GT 4.6 I figured I'd post this question. I'm having an issue with a set of FRPP 47 lb injectors. I have read several the...
You should try the "mklink" that is built into windows. I've used it for years using dropbox and other cloud based backup drives to sync all my devices. Just search for "mklink" on google. You...
Not to hijack the thread but I figured I'd ask here, while technically not a Toyota is support for FRS/BRZ on the horizon? I know that would probably involve traveling down the Subaru line.
Thanks for the replies everyone. I knew it was something I was missing.
I'm having issues with the timing on this mustang. I've downloaded a couple of maps from the repository to compare but I'm not sure what's going on. The ignition timing is not following the...
I had an SHO with only 12k miles on it, after a bunch of boltons and tuning one of the turbo seals let go. Pumped smoke everywhere. That was the single turbo one I did because the customer was mad...
Thx for the replies everyone. The cylair and cylair mult is what I was missing. Fixed enrichment issues.
Thx for the reply, I'll try the cyclair multiplier in a few minutes. The maf is probably off I agree. I've added a ton to it already in that exact hz range to try and force more fuel yet it doesn't...
I've gone through the tune, I've done several compares of known Rousch tunes but this car refuses to richen up under acceleration. I've set the pedal enrichment to 20% among other things trying to...
@15PSI. Are you running a roush strategy on a GT or Boss Mustang?
Car tuned out well. Thx for the replies folks.
Engine ----> Fuel ---> General
Tracked the problem down. At some point the customer installed high flow cats on the car in his home garage since the last tune (he was trying to quiet it down apparently). Yanked them off and can...
Thanks for the reply. Logging with a mechanical Auto-meter boost gauge right at the top of the supercharger. Probably an exhaust restriction.
Have a customer who brought me the car with mods for tuning. How much boost should the ATI 10% overdrive pulley and the Metco 2.65" pulley make? Anyone else running this setup? This car starts at...
It does have some valuable information. The instructor talks about how Dodge calculates things to help you get into the Dodge mindset. The courses do seem a little basic sometimes, like go here and...
I thought that was side by side with the SAE Parameter. Attached the layout and channel config if that helps you see what I see.
Been doing some R/D on a 2015 Hellcat. Can anyone tell me what the heck the map sensor is doing in this datalog? The car has significant mods and needs tuning. It was not put together by me, just...
Thanks Eric. That last update had the corrections I needed for the 2015 SHO single turbo conversion tune. Car is working great!
Made this earlier today. Helped me out on an ecoboost SHO I've been working on. I made it for use in Open Office Calc. Should be able to use it in Excel too. I can save it as an XLS file if...