Eric,
I've had HP Tuners for many years and was just wondering why HP Tuners cannot add 1997-2003 F-150 Line of trucks to HP Tuners?
I know you've contributed a number of supported Ford's...
Type: Posts; User: kaylin4u
Eric,
I've had HP Tuners for many years and was just wondering why HP Tuners cannot add 1997-2003 F-150 Line of trucks to HP Tuners?
I know you've contributed a number of supported Ford's...
I'll try that.
Anyone?
I changed my gear from a 3.27 to a 3.55, then went into the speedo section to modify my parameters. My speedometer is still reading 5-8 mph off. Am I missing anything? Did I do this correct?
86352
FIXED!!!!!
Wanna know how?
With the help of Corey at HP Tuners support, he suggested to go ahead and license the file I read off my PCM, then attempt to write it back. Well it worked.
I...
Pins on all of my data link connectors seem to be fine.
Let me correct that statement...initially it didn't find the VIN, so it prompted me to assign one. This is a 1999 Ford Mustang GT. I already have Ford IDS. Can't communicate with it. Was able to...
Okay, I've opened a ticket with support, but I'm basically down. I've owned my MPVI1 for many years, and read/write my GM PCM's hundreds of times.
Here's how it went down.
December 31st...
Got outside last night to do everything, and noticed the TB idle scew had backed out and must have fell on the ground or something (aftermarket TB). So I had to make a new adjustment screw and this...
Lemme research how to reset the TPS because I haven't done that in a while. Then I'll go into the VCM controls, set the IAC all the way to zero and adjust my tb manually through my idle screw right...
I've been tuning on my car for a while now, but ran into a startup problem. It's been this way for a while now and I've been "playing" with my tune to try and figure this out. I have the "Closed...
If you take your car down to someone who has HP Tuners and they tune your car for you, usually, they'll charge you for the two credits to tune it plus labor. Then later after you feel that the tune...