Search:

DGS. That’s what I needed...... now I can bypass and start motor and just run factory setup with trans and motor

Thanks for your time involved......Matt

So I picked up a 04 Srx motor trans all wiring with steering wheel dash and driveshaft.....it has 52k miles? I chased all circuits and can get it to click from keyed ignition with the vats system...

Thanks for the replies and the link .......like always work gets in the way of things we enjoy ! been pretty chaotic and I've switched gears to accommodate for my lack of no tune time aka the GASSER...

The more I mess with all this with explanations starts to make sense on the how to and why’s..... easy to navigate through..

Give me a few days to get to the adjustments...... I’ll be back

Yes it was lean when stoich which was set at 1.00 lambda . Like I said I freaked out because I was unfamiliar with it reading more I was able to richen it by adding 1.13 to the open loop f/a vs....

I was commanding 13.5 just a follow up prior post on setting up the speed density mode , I had it at 14.7 and my AFR gauge is reading 17 at times but mostly 15.5 as I was driving . The high...

well Garbage it is. She was pegged!

So I’m commanding 13.5 and will take the AFR error and copy to chart then multiply by 50%

Then I need to establish another channel for commanded...

81290

moved file to pics then posted this was my return trip home in sd

Took the 66 c10 out and all felt good the afr gauge stayed between 12.5- 14.7 and a couple 15.8

The afr averages in histo were from 17.3-17.6 how do I do the math to convert this to my ve table ...

Perfect was thinking that but didn’t want to fry anything. So just as simple as 12v to gauge then daisy chain to interface, correct.

Installed my aem wideband and the gauge won?t lite ....hooked it to the 1port on eoi and it?s a 2005 motor and ecm so I?m reading it won?t work through the obd2 which it does not , is something...

Sounds like a plan.

I’ll double check the tune
For reference then
I’ll write my original file and go from there only thing added was cam and beehive s....yes still stock injectors.
Will do...

That’s it exactly .......I’d say yes it’s been going to +25and fouls plugs no power and a lot of blurppy erratic rpm in gear almost stalling out .

I put a hot cam (
MC315944
HYD
3
218...

Question on to why on my scanner screen the ltft goes Red is this normal , dangerous or ? Just curious on operation of system.....I’m new to posting been reading for two years and only truly...

finally got things situated:) I did upload the 4.0 and the messages went away.......as far as future issues i'll deal with them as they arise , kinda like life its hard to control at times but...

did framework link from other post ? and still nothing updated 3.6.20 and still same message HUh im lost and seeking wisdom?

just preformed a search and found several pointing to framework in my computer.......so I'm updating now apologize for redundant post!

so I just updated to the 3.6 from 3.4 software now I'm getting a prompt that says

"unhandled exception has occurred in your application . if you click continue the app will ignore error and...

Well its been a few years since I posted and started anything in regards to HP tuners.....doing the work thing quite a bit which takes away from anything tune related simple carb adjustment only for...

Just wanted to be proper and say hello ,I'm Matt from Toledo, Ohio
I see I have a lot to learn as well as a lot to read!
stoked to be a part of the Hp Tuner community.....build classics and...

just tried the link and and it appears to be downloading I'm at 20%
thanks for your help and patience with me!
on my way to the introduction thread:doh:

ok so starting from scratch.... I just purchased the hptuner pro , opened the box and tried to upload usb from box and nothing followed directions from link and had my laptop searching and that went...

Sorry about that it's the MPVI PRO for GM

Just got it and I'm excited to use but there is no rush due to heavy search and reading first .... Pending projects in the wings?
I did find the...

My usb drive won't upload .... Tried the unchecking of the net 3.5 and so on and it tells me to verify it is a Windows program.

Tried searching and it was a bust need some help here with download...

Ok so I get the mpvipro and I try to upload to my asus windows 8 and it says to contact vendor to ensure it is a windows application?

Looked in the properties and yup its a window program.....What...