Also check rationality values under engine diagnosis
Type: Posts; User: 1bh
Also check rationality values under engine diagnosis
I?ve read some of your post concerning NN and VVT and you stated that it?s primarily used for emissions. On the modern hemi?s have so seen much gains playing with the VVT. I believe they are around...
A true sensor is always better than being inferred but how is the sensor being installed ?
Transbrake would be nice. Ford guys get all the fun with the new 10 speed. Currently have a twin turbo hellcat and this would definitely make it easier to build boost and not push through the brakes....
Check that your cats aren?t clogged and choking motor.
Are you on e85? The data woundnt be plug and play. Just build a histogram and adjust as necessary. Only difference I?d the dead times between x and x2. Takes 30 min to adjust injectors.
The Hellcat blower is very noisy and shows plenty of activity especially around 4-5k area (at least in my car) Both tunes should show knock sensor voltage regardless of tuning aspect.
The Afr shown is based on an e10-15 blend. If you install a wideband (14.7 cal) it would read correctly. Lambda is still 1
Excuse my ignorance but why would a billet crank be different than a forged one?
Are you guys working on a transbrake option for Hellcat’s like the mustang 10 speed offering?
What fuel? Injectors ?
Any way to reduce boost in first gear. Not sure if you have any electronics for those turbos
15psi on that stroker and hellcat blower with those pullies is correct.
Check your map sensor rationality values.
Mike,
What ended up being the fix for this code?
From my understanding HPtuners doesn?t allow deleting these codes on the diesels. Many are using a separate programmer to deactivate the codes and then use hptuners for the normal stuff. Dunno
It?s the fore system. I have to prime my pump after an extended off period.
Try to place vehicle into run position two times before starting and then fire it up.
You ever get it to read past 52% ?
Change o2 sensors and see if it corrects.
You ever figure this out?
https://www.hptuners.com/forum/showthread.php?47669-Convert-Diablo-CMR-Tune-to-HP-Tuner&highlight=diablo
Basically received a new file from another tuner and seemed to work fine. I looked at the TQ settings and there’s more items enabled with the new tune. Dunno I’m definitely not a tuner but learned a...
Well got a new file from a different tuner and issue went away. Not sure what the fix was but its fixed. Thanks
I know it’s crazy. I’m going to call Bill and see if there’s something i’m Missing.
Anyone know what’s pids might help solve this mystery? Is there a maximum amount of channels I can log before I...
Well the issue came back. The issue is intermittent which is a pain. I did have a code that popped up that was p00ea which shows up as the temp/pressure sensor but was told it was possibly a TQ...