Thank you I got the wire harness off of a 04 Tahoe flex fuel and when I made it a stand along harness their wasn’t wires for any switch in the cab hooked to the computer
Type: Posts; User: Gksportster
Thank you I got the wire harness off of a 04 Tahoe flex fuel and when I made it a stand along harness their wasn’t wires for any switch in the cab hooked to the computer
Thank you sorry
2004 GMC Yukon XL 1500 6.0 v8
hello ive been reading and haven't found out any answers is their a way to get the p59 computer to use the performance setting in the transmission tab ?
ive read something about a tow/ haul where...
5fdp
i did a cold start and drive on the freeway but i hit the load file and deleted it.
should i post a cold start and log or do i not need to worry about it
I for got to add my tune file
hello I have a 1938 Oldsmobile business coupe with a 6.0 with flex fuel injectors on it and a return less fuel rail I'm new to this .
I was getting lean codes bank one and bank two during idle...
Ok finally got the wide band to log on go tuners now I need it to stop raining n snowing here to do a log with the wide band hooked up.
That’s great thank you
hello i've added a channel for wide band and i'm in transforms part of it and equivalence ratio it brings up a window saying generic sensor tip use generic sensor yes or no I know what i'm doing but...
Hello I have a surface pro it only has one USB port
And I need one for hp tuners and one for serial logging my wide band
Question is can I use a usb hub to run both things ?
Thank you 5fdp for taking the time to help me.
I had made a set of long tube headers for my coupe but last week when I had exzaust redone their was a leak where all 4 tubes go into the collector...
I finally found that it is set to the correct tire and gear ratio size.
But fuel injectors are 25326903 flex fuel injectors and sayes flows 33 lb @50 so the calc shows @58 its 35.54 flow rate
But...
Hello I just got my hp tuners today looking at my tune on my hot rod.
I told them my tire size when they deleted vats and set it up for my car my tire size is 275/40/r17 and I took the gear ratio...
Ok sounds good I will move it back .
thank you.
I’m glad I posted a pic and had second thoughts of placement.
I will move it 6” more
Thank you 5fdp ..
5 or 6” wont to far back to read right ?
Hello I have a 06 lq4 out of a 3500 express van.
I?m making a set of headers for it now I?m second guessing my o2 sensor bung location.
Thank you kelly
I see why they charge 2000 and up for...
Another pic 95518
95517 here is a few pics
Hello I have a 06 lq4 with a 05 Yukon Denali tune for a lq4 it is in my 1938 Oldsmobile business coupe I?ve hooked up bluedriver for live data and noticed when I was in traffic the iat was 104 min...
At 60 and up
Ltft are 10 to 22 pos
Stft-5.2 to2.2 pos I’m looking at a data log that bluedriver live gave me
I forgot to put the o2 sencers I have are for a 5.3 Tahoe since that’s the harness...
They read 0 but the milavolt out put is 4.5
The mechanic was wanting to put a volt meter and test all the o2 wires going to the pc in and out.
I figured that wasn’t nessary right now and would get...
Is their a way to post more then one pic at a time ?
9195791957
Hello i dont have a hp tuners and don?t know anyone here in granite falls Wa that has one .
I have a 04 6.0l lq4 stock I have only installed flex fuel injectors 25326903 and a intake tube for...
Sorry I cannot I haven’t gotten go tuners yet.
I called psi this am they said it takes a few drive cycles before it will set the code and I need to have a little tuning done since the mass isn’t in...