The cam is not large and the engine sounds good. I told the owner to pull all the plugs and inspect them for differences and to check the plug wires as a start.
Type: Posts; User: SB2PRO
The cam is not large and the engine sounds good. I told the owner to pull all the plugs and inspect them for differences and to check the plug wires as a start.
I had read that the flashing SES could be a result of misfires and a host of other things. I told the owner he needed to resolve his code issues and that his shift issue may be related. I did scan...
You may be correct on that. He has several non-PCM codes and at one point I saw a no traction control indicator light up when it hadn't been manually disabled or even messed with. I sent him away...
No luck. Same thing. I am wondering if it has other issues that could cause the PCM to command a way early shift from 2 to 3? I am getting an occasional flashing service engine light and several...
Thanks for the input. When I get back in tommorrow I will revist the issue. Anything is worth a shot at this point.
Thanks. I don't have HPTuners on this PC to look at the changes, but will check it out when I get back to my other laptop. If you can explain what you have changed, that would be great.
Yes, that is chirping the tires on the 1-2 shift, but rpm and vss is no where near high enough to reach the commanded shift points to go to 3rd. That's what seems strange.
Thanks for the response, I do appreciate it. The vehicle is not spinning and the transmission seems locked up good in low gear. The wheel speed and rpm have not reached the commanded shift point...
Hello,
I am having a problem with the transmission shifting early on the 2 - 3 shift at WOT. It is not matching the tuned shift points. The computer is commanding it, so I wouldn't think it...
Wow. Oops! Sometimes it is the most simple things. Thank you.
Yes. I have bumped them up a couple of times in the WOT region. I'm not sure what to try next.
Hello,
I'm currently experiencing the electronic throttle closing around 5,000 RPM and can't seem to find a solution. I am feeling like it is due to the Eng TQ exceeding the Max Eng TQ value. I...
The solution provided by JnJSpdShop was the problem. I had changed everything for boost, but failed to update the Max Map limit. I went ahead and bumped the FA inc value up to .001 just to get the...
Thank you. I will check it out.
Thanks so much. I appreciate it. I'm betting this is it.
I am reluctant to post this problem, because I know it will be something stupid, but here goes. The car was originally a 5.7 but has been stroked to 431 c.i. and now has a supercharger added. ...
Thanks Bill,
I have 3 tickets:
11488 - Cory just responded to this one. Unable to connect to a 2020 Camaro. He says I should be using the latest Beta, (I just downloaded 4.9.997 a few days...
Has anyone else been having trouble with HPTuners support? I have 3 separate tickets that are going on 3 days with no response. I'm not sure what is up? And I did receive the response that they...
Heading to the Dodge dealer this morning to get a stock flash for a 2018 Charger. $150 plus my time. I posted on the bulletin board asking for one and didn't get one response. The vehicle has...
I am in need of a stock tune for a 2018 Charger 5.7. If someone has one, I would really appreciate it.
Thanks.
Definitely would be easier. I appreciate the response! Thanks.
HPTuner's (editor) can full flash just the TCM though... probably easier to get a matching file and DIY vs. hauling it to a dealership.
-edit-
This '13 1500 attached has the right trans OS...
Thank you very much, I appreciate it! I will look into that.
Hello,
I am looking for some help. I am working on an LS swap of a 6.2 engine with the 6L80e transmission. It is an E38 ECU. I am having trouble hitting a rev limiter at 4000 rpm. The...
I ended up creating a Math Parameter with the channels I have been able to scan to get the MAF error to plot. It includes Air Fuel Ratio Commanded which happens to be in Lambda. I created a custom...