Thanks
Type: Posts; User: corvet786c
Thanks
Nevermind the LT4's are prone to this. Its normal on a stock motor.
ok so basically the car is stock down to the filter, I was running a scan and detected up to 4.8 degrees of knock, during wot. The knock graph went up then stair case down. is it false, any others...
Car has been retuned with a 2 bar map speed density, MAF Delete she made 691 580 tq on a mustang dyno. And I believe it at 14 degrees of timing.
Me too looking for someone on the treasure coast who tunes corvettes
OK Update: I am using the AEM 4110 Finally some progress, After searching and trying watching videos. Make sure the interface is fully plugged in the obd port. On my labtop I plug in the serial to...
Anyone ever fix this?
Yes I can, When I change it to Gasoline 14.7 AFR drop down box it goes to large numbers like 210. 250 .etc etc
When its changed to Lambada drop down box, not sure if it is AFR but reads like 13.0...
I have everything hooked up from the serial port and have it reading in hp tuners vcm scanner.
Does anyone know why its reading in lambada and not in AFR my command is 14.63 gasoline.
I tried...
I also am trying to find some KR issue, mine ranges from 1 to 3 degrees. This sound like a good start to use a hammer while scanning. I have a quickjack, I can just raise the vehicle while its...
I have a 2002 c5 a4 procharged with twin ic and a 4.38 pulley, My tune is not perfect but good imo, Its already on this site if you want to look at it, just let me know.
Anyone fix this yet Alot of Hp tuners customers are having this issue where the AEM AFR in channels disappears when trying to log. WHAT IS THE FIX?
So many different answers?
Again Thank You for your time Doc to analyze this for me, Yes I have work to do and am still learning this.
OK Thanks I wasnt sure I am going from a 4.38 to 4.25 Thanks
bump for advice info Thanks.
My car has already been tuned, with the current setup with the 4.38 pulley, I am wanting to go to a 4.25 pulley which should give me an additional 2 lbs boost.
What tables do I have to change. I...
Yes sorry for the delay, I did buy hp tuners and have the Serial port ready to install for AFR reading, I dont want to mess with my tune, I think its fine, but just trying to find this lean...
Thank you lakegoat for looking, I really appreciate it, just wanted an idea from you guys, I am new and been a big help, if you are in fla maybe we can hook up sometime, I live in Port st lucie,...
HI I am trying to do this, I have the MPVI2+, how do I get the AEM signal to hptuners, Do I have to use the A/C wire i the engine bay to connect or just connect the blu/white wires into a DB9...
bump
ok thanks, then mine is the same
Sorry for posting additional threads, but I could not upload these photos,
anyway Are my map sensors compatible, they are both ac delco for the 2002 chev corvette. Just want to make sure...
If you guys see some knock, on 09/12/21, I tried to fix some of it, but its still showing up, but not as much.
I uploaded some scanner logs, I would really appreciate it. Looking for things being normal, or anomilies
I am new to this tuning, and would like to learn Thanks
I know, Thank you kevin, but I am asking, specifically what are the stock 1 bar ranges, compared to 2, 3 bar etc.
I am looking for specific values. Thats all