I checked the the voltage shown in the scanner it's 0.00 all the time does not increase ,tps still same 9% or 11% ,pedal position 0% @ idle
Type: Posts; User: mjl1977
I checked the the voltage shown in the scanner it's 0.00 all the time does not increase ,tps still same 9% or 11% ,pedal position 0% @ idle
Not sure of voltage ,It didn't show that only %.
I did tap on the tps lightly and the number changed to 17% engine off ,started it up it's @9% and actually runs better but not good 😁
In the scanner after i connect to the car and log the tps show 11% . if i hit throttle it goes up ,but if the car is on at idle or off key on not touching pedal scanner
shows same 11% or 11.7%.
...
THANKS ,i followed along and made changes to put it in sd. didnt do anything with ve table since i dont have stock table only the one that was added in last tune.
pretty much all i have to work...
I know about decaps having idle issues I'll get something different in the future ,budget life.
The thing I'm confused on is prior to switching to 3bar map sensor and new tune he added, the car...
haha ,always typed that way and i dont type often,thank god right :)
is there a certian setting to fail a maf?
and how do i find what the eq ratio is supposed to be?
i dont know alot about...
heres one quick idle log and few revs it seems ok past 2000 rpms under its not good,ar is 12 or 11 when its revved past 2k rpm below the af is 12 idle 16 touching throttle and it pauses then rpms go...
hi im new to hp tuners ,i got it thinking my tuner would make a few tunes i can change street track etc.well past 2 days ive been doing more than that,attached
is my tune file it is not original...