I've noticed that in the ford parts of the forum more than chevy portion. Some people like to hold their "secrets" close to their chest.
Type: Posts; User: F150Farmer
I've noticed that in the ford parts of the forum more than chevy portion. Some people like to hold their "secrets" close to their chest.
I tried it out, works great. you'll need to change drive modes to 65535. Then to choose what drive modes you want it to be used in, change duration on the drive modes that you would like enabled. 15...
Here is a '20 raptor file
141746
a '21 regular f150 file can be found in this thread:
https://forum.hptuners.com/showthread.php?103355-21-22-Ford-F-150-5-0L-and-EcoBoost-Now-Available!
Baja mode and sport mode are different. Baja is only available on the raptors, sport is available on regular f150s and raptors.
Update: Just got confirmation that they didn't have all the tables that are in the '21+ tune, but they added drive modes, so I'm hoping that's the only new table we needed. I haven't had a chance to...
I don't have a raptor specific tune (but if someone else does, please share it). Those tables are in the regular 3.5L ecoboost tune. I'm also still waiting for the tables to be added to the pre 2020...
In the closed loop bias tables, how much does changing the voltage bias in the table translate to the amount of fuel, or change in lambda?
The 2021 tune has another drive mode table that the 2020 lacks. I have been trying to get my raptor to enable it in more drive modes, but apparently have even less tables than the regular 3.5L. I am...
Thank you! You rock!
Anyone have a stock file yet to upload yet?
This video may be able to help you. I would suggest contacting the company you bought your custom tunes from for instructions.
https://www.youtube.com/watch?v=mZVNp8YCyds&ab_channel=BrewCityBoost
...
This thread is about 21+.
https://forum.hptuners.com/showthread.php?95166-21N08-Flash-from-Ford
This thread has my 2019 tune file
there are a couple in the tune repository
On the top end you're being limited by your LSPI tables (engine>torque management>general). Raise them up to the desired levels. The throttle closure is trying to limit your load below these limits.
Here is my 2019 raptor tune, stock after 21N08. I never pulled a tune off this vehicle before the change, but I added another 2019 raptor tune that I found in the forums (may have slight differences...
Torque management>General>LSPI Reduction>Hi, low, nominal effectiveness
Torque management>General>Combustion stability Limit> Max MAP, Max Brake Torque
One method is to max out the combustion...
is manual control enabled? Engine>Airflow>Variable Camshaft>manual control.
Also make sure the mapped points you want to use are enabled under mapped points configuration.
the 17s were the last major refresh and they came out with the beta tuning in the beginning of march following the release. So I'd guess sometime in March.
To answer it's original question, its after the translation. It can't be done by the throttle because when in OP mode the throttle closes often to control boost and would have a chance of dropping...
Try using the search function. Just using premium fuel on the stock tune will net you about 390hp from what I've read on a newer 3.5L. Here is a general starting guide for tuning.
...
In the f150 tunes, the way to command more PFI is Engine>Fuel>general>DI/PI blending. Changing these tables will not request more total fuel on their own, but you can shift more fuel over to port...
This should have most of the stuff you're asking for. I don't know why they aren't showing up on yours, you should be able to select a line in the channels window, press insert (opens channel...
looks to be pulling a lot of timing at idle. I would try zeroing out your combustion effects table under spark>advance. Also try logging throttle source to determine where the high throttle angle is...
Bumping up the TCC Speed Ratio for Negative Slip has helped keep it locked on decel... sometimes. I have it bumped up to 1.150, originally it was .99. I log TCC speed ratio, TCC slip, and TCC desired...