Thank you
Type: Posts; User: PLP
Thank you
thanks, do you know which one?
I just wanted to know if there was a way to temporarily put a 2019 Y62 Nissan Patrol VK56VD into rear wheel drive to put onto a dyno?
Hi, I'm tuning a 2018 SS Camaro which is partially shutting the throttle at around 5000 rpm, I can not find the cause of it in my datalogs as yet but my main problem is
The "Throttle Control source"...
ok Thank you for the reply
I'm new to this Track Addict thing, infact I only heard about it recently,
I just wanted to know whether it can be used in conjunction with the scanner and possibly transfer the GPS map into the...
I have been setting up my LM2 to communicate with HP scanner via serial, it works sometimes but not all the time so far, but only appears to log channel 1, is there a way to get it to log channel 2?
ID 1000's are not the same injector as a Bosch 1000 (980) they are a smaller injector which is modified and then matched
https://www.facebook.com/pitlaneperformance/videos/10155918268392394/
Yes thank you, he did
72543
Thanks
your lucky to get a reply, I can not even get a reply to my post from a couple of days ago re a ticket a month old with no response
Hi just wanted to know if the ticket help system is working
It has been almost 4 weeks now since I lodged a request and I have had not had a reply except for the automated one.
I don't know...
originally posted 31-01-2009 by vcmswt elsewhere
There is no doubt you are doing a great job and have implemented many changes which is making the software a better product, but it appears HP as...
It's great that HP are getting things happening but pretty sure based on what has been posted elsewhere and what people in know have said is that HP have been working on ZF for 4 or 5 years
ok, I downloaded it a little while back after that when I went to my customer page it would show up there, now it doesn't so I assume they have been doing on going updates and I need to ask again, is...
not showing on my update page anymore?
sorry about that, I'm using the pro
I'm using the phormula knock detection equipment, to be honest I find it a little hard to actually hear light knock over the dyno noise etc, but the 5 volt output connected to my dyno gives me an...
Hi all
Have been playing with my lm2 through my eio and have followed lots of info here but have consumed way too much and now my head is spinning.
I have set the data as per the various excel...
the log may say it's impossible, but would not be possible to actualy have it
How can they go above 100%, 100% is help full open.
Cat needs the fuel to be switching around stoich to work and going leaner creates more nox emissions , although it drops co2
From what I understand and happy to be updated, Mainline at one stage were trying to work with SCT and HP re logging with their products, SCT were basically no help from what I understand, but HP...
sounds like you need more dashpot decay.