Pretty crazy huh? My friend is telling me that there are stories of BMW voiding factory warranties on vehicles with this code.
Type: Posts; User: torchredfrc2
Pretty crazy huh? My friend is telling me that there are stories of BMW voiding factory warranties on vehicles with this code.
Bill,
I received the Beta back in April and was able to scan a 2010 BMW 335i (diagnostic codes only). Today I tried to read codes from another friends 2007 BMW 335i and the scanner would not...
Can the generic scanner read this code from a BMW?
2D25C:
2D25 Mass Air Flow Excessive - External Tuning Box Detected
Error will not cause a warning light
Error is currently present
Test...
Thanks Bill. As I said in the 2nd post we did disconnect the battery over night. I just spoke with my friend and that cleared up the problem. Is this an HPTuners bug or a problem with these TCM's?
Just wanted to add, it was late last night when this started happening. I suggested to him to park the truck and disconnect the battery in hopes this would reset everything. We have not tried the...
I logged a friends 2008 GMC Sierra last night and after doing a PCM read (high speed checked) the truck started giving a U0101 "Lost comm with TCM" code. The truck will crank but will not shift when...
I just wanted to add a side note to this post. The settings I used in the LM-1 to correct the offset I mention at the bottom of the page are as follows:
...
I adjusted my DFCO Map Entry/Exit by adding +10 across the board & this seems to have eliminated my surging. Only problem I'm forsee having now is that it looks like DFCO will not ever happen in 5th...
The only part I changed when I started seeing the surging described was the stock injector to the SVO 42# injector. The only PCM change I made was to the IFR table using redhardsupras injector.xls...
:(
Dang, I was hoping that you got this issue resolved & I could learn from you.
Have you tried adjusting the minimum injector pulse width? It looks like I see surging when my pulse width drops below 1.9ms.
I'm seeing the same issue with the 42# SVO injectors i recently installed. I'll put up a log in a little bit.
Any updates from Innovate muncie?
Subscribing to this post. My LM-1 is also ~2 points below commanded at idle. I have details about my install at http://kashmir.thend.org/~mkane/Corvette/wbo2.html
Here is an image showing my...