Search:

OK. So I have to upgrade from the Beta then. The switch to the COS was based on Dave's recommendation as it is the correct way to do things and you get better fan controls etc.

BTW, ever since the...

For the fuel side I was thinking of adjusting the stoich since methanol's is different and pulling some fuel since some is coming from the methanol.

Do I have to have the latest version 2.24 for...

Yeh, I installed that on a 2010 Camaro back in 2010 but never used it. I have both softwares but use HPT for the Camaro and the other one for the 2003 Silvy because of the COS for Nitrous. Also use...

Are you still offering free tech support if running a Circle D tranny/TC?

Anyone?

I see that there is an option in HPT to disable/enable E85. What would happen if I enabled it and grounded the wire I installed in the pin location where the E85 sensor would hook to?

I...

Can we access the E85 timing and fuel tables on the 2010 Camaro?

I was going to use a EFIL COS so I could use the E85 tables to retard timing and adjust fueling when running nitrous. I installed a...

Thanks again, mecanicman.

I went out and tried it. At first it was reading wrong but that was because the settings on the LM-1 were at 0-2 volts. I changed it to 0-5 volts on the Analog 1 and...

Great thanks a lot.

I will go out and try it right now.

I am trying to adjust some setting on the tranny but need to know what some terms mean. The car is a 2010 Camaro SS.

What does Pattern Normal, A & B mean? Which one is D on the selector or M?
...

I have searched and read about how to set it up on the scanner but what I need to know is how to physically wire it.

Which wire(Red, White & Copper) from the LM-1 hooks up to the MPVI and to what...

Thanks. I ordered one yesterday and picked it up this afternoon. I will install it tomorrow morning when the car is not so hot.

I am wondering if it was causing low mpg's as I just drove 1200...

I am getting a lot of O2 Sensor DTC's. I think I need to replace an O2 Sensor but I need to know which one. Front driver or passenger?

Here are the codes I am getting.

[ECM] P0050 - HO2S Heater...

I picked up a 6L80 from a wrecked 2010 Camaro to replace the one in the Camaro because it is slipping. Will I need to take it to a dealer to program to the current VIN or anything like that? Also,...

Currently it has a built block(forged pistons and crank plus billet rods), ported & polished heads from WCCH, ported intake from Vector, Mast Stage II VVT cam, ADM Race CAI, custom headers/exhaust...

No good tuners in SoCal huh. How about any place within 1000 miles or a full days drive?

Looking for a good tuner for a twin turbo 2010 Camaro. Who would you guys recommend? I am in southern California but would be willing to drive a bit to get a reputable and competent tuner.

No problem just let me know.

I have both because I had EFI Live but my brother had his 2010 Camaro tuned via HP Tuners so I bought it so I could load the changes his tuner sent via e-mail and make changes. Also, EFI has some...

With this newest version I will not have to disconnect the battery after a re-flash? Or will that procedure still required? Besides the hard start what other reason is there for unplugging the...

Has it been done on the new Camaro yet? I will try it right now.

How/Where do I check to see if that is available on my scanner for the 2010 Camaro?

Guys, I need to do a crank relearn on a 2010 Camaro but was told my EFI Live or HP Tuners can't do it. I was told to use a Tech II or something similar.

Does anyone in southern California have...

Who would you guys recommend as a tuner for a 2010 Camaro in the southern California area?

Thanks

That is messed up.

My brothers car was tuned by someone local and he had to get a license then I used my cousins interface to read his tune, datalog and load updated files. Now, I have the car...

Can I transfer a license from one interface to another? I used my cousins interface to load a tune onto my brothers Camaro but I want to buy HP Tuners to make changes to the tune. Problem is I don't...