Search:

This worked for me, good thing too because this whole issue was really ticking me off, I've wasted hours trying to get this to work.

Thanks,

You should join Bonnevillepro.com or Pontiacbonnevilleclub.com

Int he Bonneville Pro forum you can post in the tuning section.

At Pontiac Bonneville club talk with Kyle - aka - Allmachtige
...

Chris,
It will work but its not the best choice for you...
looks to me that Blackeco hit the nail on the head, that GM reflash is fine & dandy for the perfect collection of stock parts but that's...

Hello,
I tune some of the L4's in the Phoenix area and one of the locals is planning to bolt on a M62 and a very agressive discussion broke out in my driveway last Saturday night.
First off keep in...

Very nice, :cool:

Now we can hook up my friend.

I'd love to hear your feedback on this device.
Did you get the gauge too? and although i could look in my scanner config, its easier to ask. :D...

Hello,
I have a friend that is looking at purchasing one of these therefore I found the topic to be of interest.

My thoughts are that the Black wire from the PCM wire harness needs to be grounded...

Hello,
I thought I'd report back in on this topic because appearently we got it figred out and it was tune related.
The proble was all in the timing, basically we had to do a timing tune.
We got...

This is an interesting post here fellas.
A friend has a 98 Grand Am with the 2.4 (L4) 5speed and he bolted on a supercharger.
I have figured out how to tune the car, its not finished but its really...

I had a bunch of problems figuring this out too. In fact, i don't remember how I finally got it done.
I'd be happy to send you a config file so you can use simply to learn from.

I swear it took...

So if you completely remove the vac line from the modulator then your at full pressure right?

Test that.
Remove the vac line from modulator.
Plug the vac line so the engine doesn't ave a vac...

I have one of the original NGK AFX sensors in one of my cars and its got about 16k miles on it, I never run the engine with it powered off, I figured as long as the heater element is on, it should...

This is a good thread, when I switched to the 3:69 gears in 2005 ZZP sold me a 34 tooth reluctor and I still couldn't get the speedo working correctly.
The result was that I had to buy a micro...

I have one, please give me an email address and I'll send it to you.
I won't post it in the repository until the owner authorizes it.

Later,

So what's going on with this trans issue?
This car has had its share of problems since I've known Ben.

Looking forward to seeing this get resolved.

Its been a while since I looked into this forum but thanks for the tip, I've always wondered were that repository was.

Thanks again...

Later,

Russ.
These are his files that I had in my laptop.
The tune that says stock modified means its his stock PCM and we added his timing & tune so it would run right but we had been testing stuff in...

Well ok... But I noticed that the "Repository" is histrogram and configuration only. I didn't see one tune in it.
I its for programs too, it should say that I guess.
Whatever.

Hello,

I am dropping off some tunes for a member called bp25. These are from a 1998 Grand Am.

Of course one of the tunes is called stock Please don't be alarmed by the file name havng "Craig...

it sounds to me like a missfire, you know...

bad plug wire = most likely
Bad plug = possible if they are autolite's. When they die you can get a code for three way cat low efficiancy because of...

Wow..
you have some serious mods there Mr. I figure your at the 12.0 bracket right now.
What is going on with your tune right now?, did you get some stuff ironed out?

Those pistons are heavy,...

Your trans stuff is basically untouched.
Based on your sig, you have a hard input shaft in that intensified trans. :o That didn't sound right. :secret:
I changed many trans parms that I had when...

When your 7% to 15% TPS its mint.
or when your 4625 to 5500 Hz its mint part throttle but your commanding strange stuff ramdomly, need to clean that up.
When your in PE mode your commanding 11.7...

Hello Mr. 00GTP.

I agree with you 100%, you have something in the tune that is causing this.
I have basically the same mods and as you can see by my sig, my car runs low 12's.

I'll look at it,...

I believe i still have a copy of your files on my laptop, if not you posted it but... i'll check.
I believe your perf & normal parms are the same but we can make your hot parms the same too, just...

I didn't figure out anything by lookig at the log but I was thinking..

You don't have the perf shift button but who knows which one of those parameters the PCM is using. Your PCM is commanding to...