AEM wideband.
Type: Posts; User: AdamE
AEM wideband.
33pound injectors, yes. Yeah still have them. Are they neccesary?
Let me know if i need to add anything else, thank you.
Sorry about that. Wideband im logging thru A/C
Channels 142432
Layout 142433
Graphs 142434
Wideband math via A/C 142435
Wideband error math 142436
I am running into a issue i haven't in the past i cant get figured out, i am leaning towards it being a mechanical or grounding issue. Possibly dirty injectors. But figured i would check here to...
Injectors are 12580426 (33 lb/hr @ 50 psi, Return Style (02-04)). Holley 12-880 Regulator is at 60psi. -6an feed & return. Im not sure how long these injectors are going to stay in it but hoping...
Here is where its at currently, after correcting injector data and MAF table. I think ill probably raise IFR to 36.1 since the stock data is based on 50psi vs the 60psi its running. Or would u...
Ill take the opportunity to learn something any time, yeah I would appreciate that very much. Thank you
There is still work to be done, i agree.
no trolling here.
Its hard out here for a pimp. Lol jk, its a customers budget minded project. Its got a holley return style regulator on it, by no means is it the ideal setup but its gotten the party started. Just...
Good info, thanks. Im going to go do a big smokey, over-fueled burnout at the WEF in Davos. Heard its a good week to do it. With my failed MAF sensor :usa:
I did a write entire and cleaned the spark plugs, she popped off like normal. Good to go
Did i miss something? Lol care to elaborate?
Ive been slowly making changes to this project. Setup is a 5.3, turbo cam, 7875 turbo, pump gas, p01 ecu, 4l80e, dbw throttle in a 1970 c10. Im suddenly having a issue causing the truck to not...
This was indeed the issue. I had been trying for hours to figure it out by time i made the post and didnt think to list the mods, sorry about that. I appreciate the help though! Thank you
i may have found something that isnt helping.. Its the: - Power Hop Torque Mgt Cylinder Disable vs. Mode: Disables injectors during a very large torque transient. This table is an 8bit binary...
ive got Torque MGT Advance i can add, nothing with fuel or spark i can add thats torque management or fuel cut related that i can find
I am running into a issue where i am losing control of the throttle halfway through a pull. I have ran into this issue before with the Calculated Max MAP P0106 error in a different vehicle and...
I forgot to add engine mods. So its a gen 3 4.8, gen 4 rods, Rings gapped for boost, LS7 Lifters, BTR 660 Springs, LJMS Stage 1 Turbo Cam, BorgWarner Cast S475 T4 1.1 a/r, Hotside consists of...
I cant seem to figure out what is causing this low rpm part throttle knock. What seems to clear it up is laying into the throttle. Its a 4.8 remote mounted turbo running on 91 octane. 4l60e and...
I just came across this under the Tools drop down menu then going into options . Was unchecked when was given the reading error messages. hoping to find a confirmed fix before going back to scan...
I was trying to read a guys gen 3 LS P01 ecu last night and kept getting a error message at about 3% into reading the tune file. From what i have gathered it needs reflashed with the original tune...
on another note, in case anyone was in a rush to buy a 49cm cam kit from that place. They are SOLD OUT.
here is the response i got for asking about cam specs :rolleyes:
119623
Thanks!