You are my hero Chris White.
Type: Posts; User: mattgallan
You are my hero Chris White.
I was thinking about it for the RTT capability
I just mean it's limiting your commanded base fuel table. You aren't getting the commanded quantity, that's all. BRING ON THE SMOKE!!! I don't care as long as you have a way to measure EGT.
it's tunerlocked cuz
The Max Fuel Normal table looks like it's limiting
Just try adding more shift pressure from 300 ftlbs and above on upshift pressure for each upshift. It's mostly about what feels right to you.
http://www.hptuners.com/forum/showpost.php?p=96474&postcount=2
Post the tune also!
That Cl8 scan is really clean, you have nothing to worry about.
Check to see if it's burst knock.
Either way they are going to know the computer was changed, and possibly deny warranty. I would leave it alone unless it's obvious that it's tuned. (lots of smoke)
Greg what kind of format is the injector data in? I ordered the dvd yesterday and was just wondering :)
I would like to be able to check boxes to flash the ECM and TCM separately, if I felt like it. I realize you don't license TCMs separately - that I don't care about. Mainly it would be nice to skip...
You need the latest beta. Email support with your serial number & request it.
I second that! Thanks Bill & engineers!
lol @ IFR table :)
edit: nvm I just looked at the whole tune and lol @ everything :)
If I found this out I would immediately switch from AC Pressure to EGR :)
05 GTO w/ E40
Oh and another thing if all else fails is to put a resistor, probably about 10k ohm from the +5 on the sensor to the sensor output with the engine off. Measure the voltage the ECM is seeing with a...
First off I would try the grounding issue. It isn't so much that you ground the wideband controller to the battery but the same ground as the egr/acp signal input. I just grounded my controller to a...
Thanks Keith, you have no idea how much it bugs me to have to restart to use your software everytimehttp://www.ls1gto.com/forums/images/smilies/bomb.gif
Just remember not to hate us(end users),...
First off - Thank you 5 Liter for all the info and help for this. Here is my setup and it works perfectly (+/-.1 AFR all the time)
'05 GTO E40 ECM
LM-1 Wideband Controller (Bosch Sensor)
XD-16...
Sorry bud I thought you said LB7. Try the "Engine Speed Limit" tables and change the torque limit vs. RPM to something like 100 ft.lbs. after 2000 rpms. I, however, haven't tried this yet so you are...
engine->fuel control->fuel cutoff
I completely agree, I'm just giving you a hard time :worship:
I get this BS occasionally only on LB7s. Just make sure the battery voltage is good and keep retrying until it works. I've had that error on bone stock trucks.