thanks Jimmyblue. I'll try to dial that light throttle method in... already had the WOT set up with no lock up.
Type: Posts; User: TommyT
thanks Jimmyblue. I'll try to dial that light throttle method in... already had the WOT set up with no lock up.
Ok, gentlemen. I've never fully understood auto tranys, but I'm learning. The questions I have are simple. One, during normal or cruise situations when should the converter be locked to get best...
Thanks guys. sometimes I need to hear more of why not to do something instead of just "it can't be done that way". I know my mods are very simple and my improvements will be minimal, but learning...
On a stock engine (5.3) with a K&N FIPK II and flowmaster as the only boltons, is it possible to correct the maf output by loging maf (hz) and maf (lb/min). I Know by most of the posts I've read you...
Sorry Russk this wasn't your tiremath spread sheet I was looking at. Contacted EC_Tune directly
I spoke with the insurance adjuster and she can't give me a final answer on if the truck is totaled, but she said its gona be close. I'm thinking about swaping an all alum 5.3 from like a...
Due to the recent demise of my '01 Silverado daily driver(Pics below) I may be moving my '88 Camaro project car off the back burner and into the daily driver status. I seem to be in need of a...
I kinda figured that. But I had to ask. Thanks anyhow.
I tuned a friends z-28. He is considering buying HP Tuners. Can we transfer the License for his car to his interface? If so could the credits used to tune his car be transfered to my interface??
...
No I don't hate NBs. I still don't understand why the OEM don't just use WBs and make things more acurate to begin with. I'm giving my wife christmans gift ideas and want to get what I need and not...
Is it really necessary to use a dual channel wideband setup if we can't control left or right side injectors? Other than being able to tell which side a bad injector might be on I can't see where its...
My bad I didn't remember the Tuners web site did only list '04-'07.
I was going to read the pcm on a friends '03 F150 Harley Davidson and send the stock tune to HP Tuners for R&D if they needed it. I was unable to read the stock tune. I kept recieving an error that...
Thanks I found them. My dream was much simpler though.
Since you are a moderator, could you suggest someone from the forum near Houston that I could meet with as mentor.
Ok I'm lost. I'm suggesting get rid of the narrowbands and replace with WB O2s permanently. Or are the NB O2's a necessity?
Yes I understand we can do that. I'm thinking it would be easier and cheaper to just replace the OEM narrows with a good wide band O2 . That way no extra bungs would need to be welded in the...
If I understand half of what I've read tuning with wideband O2s is the only way to tune accurately for WOT. There are different OS for 1,2, and 3 bar Map setups. Is it possible to create a wideband...
Info greatly appreciated. I think I found my answer to the maf or no maf question. set it to fail= 0 while tuning ltft's. Myabe my wife will give me a wide band for christmas. Were on the Dave...
Ok, Maybe I'm totally off base with this question about O2 sensors since no one has responded.
TommyT:shrug:
I'm a newbie to tuning. I've been reading the forum till my eyes are starting to refresh at the same rate as my monitor(headaches getting worse). Before I tune the LTFT's should I get my stock O2s...
Thanks for the prompt reply. I am a newbie at tuning so I'll probably be here alot in the begining. I have used a Hypertech III but I now know that is "Tuning for Dummies".
I am thinking about buying Hp tuners and I have a question. I hate using our laptop and I prefer to use the desktop its just easier. Could I install the program on both, manipulate my tune on the...