HI:
Well your new Beta version software will not work on some 1998 Corvettes. You will need to look in to this. It cannot read the PCM from editor. The scanner works but not the editor. It works...
Type: Posts; User: corvettedoctor
HI:
Well your new Beta version software will not work on some 1998 Corvettes. You will need to look in to this. It cannot read the PCM from editor. The scanner works but not the editor. It works...
Everything is done and working perfect in the truck.
Thank you to all for the help.
Chris
Thank You Very Much.
Chris
Hey Bill.
Just checking on the progress of the swap on the files I sent you.
Thanks
Chris
I can reflash to a 12606807 if this will make it easier to do.
thank You!
Thank You.
I will send to support.
Any help in doing the swap will be returned if I can do soomething for you.
Thanks
I have a 2006 SS Silverado that I am upgrading to a 4L80E Transmission and need a segment swap. Anyone that can do it for me would be nice. It's time to put the monster in and it will be my first.
...
OK I need to know if in HP tuners there is a way to change the boost control valve solenoid tables. They read by percentages to MAP. If I can get acess to these then I will be able to make the boost...
Thank you and I let everyone know how it goes.
Chris
I have 2 ZR1's to tune soon and would like to know what parameters in the computer that I will not be able to gain access to adjust. What I mean is I keep hearing that there is a section where I...
Set your Burst Knock to 0 and see what happens.
Chris
I will give that a try and let you know.
I will be working on the car later next week. We shall see what happens.
Thanks
Here is a update tune for all of you to look over.
Changes Idle spark table and RAF.
A little MAF tweak and fans made it run just a bit hotter. It help with surge.
Still a little rich at...
HI Everybody.
Got some issues with a 2007 Z06 with a Katech 220/244 .616/.648 110 lsa.
Here's the problem at idle and and around 170 and up coolant temp the engine runs rich. 13.4 to 13.6 after...
OK So the upgrade credit page gives you your upgrades you have and the other column tells you how many more you need to do the whole year.
More clear now. Never looked at the upgrade section just...
I am trying to do a 2007 Corvette. When I go to my upgrade credit licenses it tells me that I have enough credits to do all 2007 Corvettes. It tells me I have 6 upgrades and for all 2007 only 6 are...
First of all do not use the module that comes with the kit. It is junk. Next if you have problems writing to the PCM then do a complete rewrite instead of just a calibration write. You have to...
It works fine. Thank You
Chris
HI:
I am having a problem licening a 2006 XLR. Tells me OS and VIN do not match.
Here is the file for you to check. 8555
I need to tune this customers car. Tell me what I need to do to...
I am looking for somebody to share a 3 bar tune for a twin turbo 408 2003 Corvette engine. Need a good place to start that will allow the engine a good starting point. Will be my first. Here are some...
Well spark control does not work, Transmission gear select. I see there is no setup for A6. AFR control does not work either. These are the main features I like for testing before I tune and they do...
I was wonderiing when the VCM controls for the 2007 Corvettes will be updated to work. What I need to help me tune does not work. Missing all the good stuff. Or is that the way it is for now.
...
OK just got done with a 2007 A6 Corvette porting heads and installing a cam. (Note: The cam is very differant and old LS1,LS2 cams with not work.) But made a kit that adapts any older cam to fit...
I have a corvette that has had the PCM replaced and updated with new GM software. Now I go to read the new PCM so I can load my old program for the engine and it tells me that I am not licenced for...