Search:

Type: Posts; User: JaegerWrenching

Page 1 of 10 1 2 3 4

Search: Search took 0.00 seconds.

  1. Post your tune file so we can talk about specific...

    Post your tune file so we can talk about specific tables
  2. Just wait the engineer will fix your file and...

    Just wait the engineer will fix your file and send it back to you so you can tune it. Worst case they will just send you a stock copy of your current strategy.
  3. Replies
    1
    Views
    55

    Forget about a 50/50 split, it tells you nothing...

    Forget about a 50/50 split, it tells you nothing about cylinder pressure. Log your injector PW and think of having 8* to be super safe or 10* of advance for every MS of PW. So if you have a injector...
  4. Replies
    5
    Views
    86

    For now yes, they will be added to the older...

    For now yes, they will be added to the older stuff as Eric gets time to find them and add them.
  5. Replies
    5
    Views
    86

    The table is labeled incorrectly, currently the...

    The table is labeled incorrectly, currently the table labeled max RPM is actually the enable RPM Not the Max RPM. The other, Min RPM is the reset/ shut off RPM so it has to drop below that. Its stock...
  6. Replies
    5
    Views
    86

    New Tables added to the 6.7L

    Download Beta 4.7.86 and go check them out. There are Idle RPM control tables, more boost tables, some new fuel pressure tables, more airflow tables, and engine brake tables. I'll be working on...
  7. Replies
    10
    Views
    298

    Here is a great video on pilot injection...

    Here is a great video on pilot injection https://www.youtube.com/watch?v=rGv1hOCxdc4
  8. Replies
    10
    Views
    298

    https://www.youtube.com/watch?v=-aUbIaXeZI4 here...

    https://www.youtube.com/watch?v=-aUbIaXeZI4 here is a video of pilot turned off and how loud it is on a single injection event. I personally think it's nice to have a quite engine and not have this...
  9. I'm waiting on some tables to be added and...

    I'm waiting on some tables to be added and hopefully they will be added shortly. Currently you can only make 47.8 lbs a min of airflow before being restricted by the maf. The first video is already...
  10. Replies
    78
    Views
    22,212

    Yes that tuned posted above shows positive 7, 11,...

    Yes that tuned posted above shows positive 7, 11, ATDC which is negative BTDC. That seems like a quite late injection event to me, just like you said you're at 4 degrees BTDC at idle. So in order to...
  11. Replies
    3
    Views
    183

    You still have torque management pulling 50% of...

    You still have torque management pulling 50% of your power on the shifts, you can also bump line pressure which will help speed up the shift some and hold more torque.
  12. Replies
    78
    Views
    22,212

    That's what i thought, the one thing that throws...

    That's what i thought, the one thing that throws me off is how they idle at -11* to -7*BTDC. Fuel pressure is only at 5kpsi so They must have a very fast reacting injector or be higher compression...
  13. Replies
    78
    Views
    22,212

    Do you have a data log of your truck? I'd love to...

    Do you have a data log of your truck? I'd love to see what it's actually seeing for main timing and injector PW. I'd also like to know what table it's using for timing when up to temp, i'm trying to...
  14. I haven't tuned any 7.3's yet but i have looked...

    I haven't tuned any 7.3's yet but i have looked at the tune files for them, i also know they use a similar ecu as the mustangs which i have some experience with. As far as questions ask away myself...
  15. Replies
    10
    Views
    298

    Map's 1 -4 are different temperatures then inside...

    Map's 1 -4 are different temperatures then inside each temp zone is different configs or elevation. Then inside there is different modes for things like regen normal and so on.
  16. do you have a data log of it happening?

    do you have a data log of it happening?
  17. Replies
    4
    Views
    127

    IN the scanner hit the vehicle icon to connect,...

    IN the scanner hit the vehicle icon to connect, once connected but not logging open the vehicle drop down and click on repoll for supported parameters and then look for your trans PIDs and see if...
  18. What if you set the OSS to the appropriate MPH...

    What if you set the OSS to the appropriate MPH you want it to lock up at? Just remember OSS is = to your driveshaft speed, but you still have to anticipate the lockup. Maybe try setting the lockup...
  19. I did see that i have a slight slip, i can't feel...

    I did see that i have a slight slip, i can't feel it but appears to be 5-10 rpm slip. Are you 100% sure this isn't just noise or false data? If not what is the reason for it and do you know how to...
  20. I'm working on it and the first video will be out...

    I'm working on it and the first video will be out in two weeks.
  21. Your converter is locked from slip to lock, you'd...

    Your converter is locked from slip to lock, you'd lower your slip value to lock up sooner, or raise it for a later lockup. Lock up rate will change how quickly it locks up after the slip oss is met.
  22. Replies
    14
    Views
    2,781

    Your indicated engine torque tables are important...

    Your indicated engine torque tables are important to get right as well, they change how much "torque" the engine is "producing". If you add power and don't adjust them properly you'll have issues...
  23. It looks to be locking it with the cold shift so...

    It looks to be locking it with the cold shift so try lowering the cold shift temp and see what that does. I'm curious to know why on the eco boost 6r80 it's that way but not on the 6r140 or big...
  24. Replies
    23
    Views
    2,078

    Jeffrey you're confusing the pilot's with the...

    Jeffrey you're confusing the pilot's with the main injection. The Pilot injection is not part of the split unless the calculator you're using adds it to which i'd say that's confusing you. Most of...
  25. I think it doesn't allow for certain adaptive...

    I think it doesn't allow for certain adaptive learning during this condition because the fluid temp is constantly rising and it's hard to get consistent data during this time. This would produce...
Results 1 to 25 of 230
Page 1 of 10 1 2 3 4