Search:

Here I will just link to YouTube videos, again same idea, is this the good, the bad, or the ugly, I'll let you decide.


Alfred Martinez Hp tuners setting abuse mode.


Goat Rope Garage Gen 3...

so I don't mean to beat a dead horse but I really am determined to get to the bottom of this, and here i will post links to the threads that come up when you Google varieties of Gen 3 HP Tuners Abuse...

Startup Airflow

First in the Scanner add these Channels:

Idle Desired RPM
Idle Desired Airflow
Idle Startup Airflow


To make changes in the Editor go into: Engine \ Idle \ Airflow \...

Thank you, so it's not sitting at a stop sign in Drive left foot on brake right foot bringing up the RPMs to say 1,500 and then lifting off the brake?

I am not questioning you or anyone on here,...

in order to see anything on the right in the histograms those items first need to be captured using the channels on the left, maybe this Tutorial will help
...

log your Torque Management Advance channel and make a chart of it and see if it is retarding your timing in between shifts

what vehicle is it? on mine it was a bad fuel pressure regulator up on the fuel rail

I don't think it is all or nothing, that's what the EQ Ratio (Gas) table is for and as someone already pointed out it looks at what RPM you are at and commands that fuel mixture.

I know this is an old thread but I hate orphaned threads, plus it is a valid question, yes Speed should be set to 0

I have seen various Gen 3 videos where they have us disable "Abuse" under either the Engine or the Trans sections or even in both places, but I am still confused on how the Engine Torque Management...

Not to beat a dead horse to death, and I appreciate your feedback, I think I found it, however it changes both Spark and Fuel histograms, which makes it correct for spark as that histogram is RPM vs...

Thank you Bill, I asked because I thought the graphs were tied to the Channels and I was seeing this when selecting Vehicle Defaults, so I assumed if it senses that I have a GM Gen 3 4.8L then it...

Can anyone comment on why the stock Spark Advance and or Spark Retard graphs/histograms show Manifold Absolute Pressure as the Y axis instead of the much more appropriate for tuning Cylinder Airmass...

what year LS1 and do the fluctuations change at all as the engine warms up? I forget exactly at what temp the LS1 kicks in to use the idle fuel trims, but does it do it the whole time or does it...

Those of us in California where are you getting your 93 Octane from? I'm in NorCal (Sacramento) and all we have here is 91 Octane. I've never really paid much attention to gasoline types other than...

total newb here, first post

I would like to swap a 4.8 into my '74 GMC and since the 4.8 came with manual transmission they would be a nice candidate, the 5.3s I recon didn't (the 6.0s did but my...