Appreciate everyone's input,
Thanks Neal
Type: Posts; User: legerwn
Appreciate everyone's input,
Thanks Neal
Appreciate your guidance Joe,
Thanks Neal
Thanks for your reply, He's been pretty easy on it,
His trans cooler is up front around 12" x 12" x 1.5" with its own fan
Tires are 32" tall, rear is 3.73, stall is 2600
Driving down the road...
Do the virtual torque tables have the same affect on the 4l60e as they do on the 6l80 trans?
Buddy of mine has gone through 2 trans at light to medium throttle openings.
Trans builder says tune...
Also interested in this one
this can happen when the ECM determines the crank acceleration and deceleration pattern has changed from the learned pattern.
a crank relearn can usually fix it if this is what is happening.
...
07GTS, does your method work with VVT cams?
2008 Hummer H2 with L92
I may have amnesia but need to verify,
I made some changes to my tune many times playing with the idle and for some reason I remember the proportional rpm error being...
I agree, the butt dyno says 5th with higher RPMs yields less down shifts on gradual grades while cruising on the interstate while 6th is very lazy and down shifting regularly. With the cam I have I...
All around best performance,
2008 Hummer H2 (square block)
L92, 6.2L, GPI LLT 2 cam (2250 rpm and up)
2600 Circle D, 6L80 Trans
Thermal Barrier on Piston crown
DFL-1 coating on piston skirts
LT Headers with full 3" duals,...
Thanks for the explanation charcoal, I understand your point
charcole, what method do you use and what should I be concerned with doing it this way,
appreciate your input
I should have included that I made both tables the same then tuned to the fuel I normally use (low grade).
5FDP, I may not have explained it correctly, I understood it to be as you explained it, 1.00 as high table biased and 0.00 as low table biased.
after working on the spark timing tables and getting them where I thought it was close I added 5* to the high table and removed 5* from the low table then allowed the ECM to start tuning the timing...
Have you tried to disconnect the shifting cable and make sure its going to 1st gear by hand at the trans.
If shifted to second gear it will take off in second gear.
They answered my questions pretty quick during normal business hours
I've seen it said that when trying to fill as many cells as possible in the VE table it is ok to use a lower trans gear to get to the higher cells (higher rpm).
It would seem to me that this...
OK, mine is discoverable but I cannot find the PIN for the adapter,
where would I find the PIN for the Bluethooth adapter
Thanks Neal
Solved; This turned out to be a windows 10 issue, for...
sorry not sure what you mean by mapping for the 4l60e
Neal
4L60e
Being new to the tuning world I've been tuning my trans for a few days now, I was working on the TCC lockup timing as it would stack the 4th and TCC lockup at around 40 mph then unlock instantly. Was...
Yes Sir I do understand the guidance,
I should have listed that I am not using a wideband at this time. I do currently have and use an Innovate LM1 to tune my vette, BBC 496 solid roller, around...
CSSOB I've watched your tech videos multiple times, thanks for putting those together they are a great help for us new guys.
So are you saying to still shut off the trims while tuning the MAF...