HI
my g8 the afr totaly change after the fans working, I tried in idel ac ramp in and out and still same issue
please advice
Type: Posts; User: Rayan_V8
HI
my g8 the afr totaly change after the fans working, I tried in idel ac ramp in and out and still same issue
please advice
thanks for answer
still I don't know why the second and third gear not lock TUTD
here unlocked 2ed and 3rd gear with fully commanded locked in the street
other car after I maxed at dyno, after full 100% tps the TC come Unlocked
I did it before your advice, no change
Thanks
please check the VCM post
I did other hpt the max pressure 110 PSI , still not fix
I posted now
Thanks
thanks for advise, I will try it
yes its large tube (DDR Intake )
no I started after I uploaded the file
Thanks
yes I started the car then check engine light come
kindly see the attached HPT
107960
Hi
If any one has same this issue? my TCC not lock at dyno only, on the street fully commanded lock
At dyno, I noticed the tcc line pressure working after 6100 RPM
I get back street to test and...
Hi
I have friend has camaro 2017 v8, he installed cam shaft and bolt-on, I already disable all codes related for cats or H2o in DTS but still come check engine light
this codes come...
Up.................
you mean the problem at dyno !!
Any answer!!
Hello guys
I noticed many 6l80 tracks in the dyno coming slip because the tcc line pressure not work or low pressure, as same time when I tried in the street the TCC Line pressure working well on...
Any answer !!
Hello Guys
I have holden Ve 2013 I fully locked all trans ( 30-40 mph) but the commanded for the third and second gear not lockup and the slip was 90-140 Rpm ! the 4th gear is lockup and the slip...
Ok good results
But if you have single disk TC and the rang of slip 350 rpm, you will prefer to dual disk lockup and zero slip ???
Yup, I saw this
Thanks
Any one has test at street or drag ? With unlocked 6-3% slip ?
Hi
You mean the unlocked is less power than locked ?
Thank you I get your point, but I was try by unlock TC ( single clutch circle D 278 mm ) and I have slip on all gear above 350 RPM !! I don't know if this step is regular by this TC ? I don't know...