I have my idle pretty clean as of now. It just wants 1150 rpm. The cam is big, 243/259 651/651 112 LSA. 27 degrees overlap. With the super victor intake and FAST 4150 throttle body do I have a chance...
Type: Posts; User: hbunker
I have my idle pretty clean as of now. It just wants 1150 rpm. The cam is big, 243/259 651/651 112 LSA. 27 degrees overlap. With the super victor intake and FAST 4150 throttle body do I have a chance...
Thank you!
I have searched all over the forums for the config file for this. Does any one have the file I could download or a link to the thread with it. I am getting the idle pretty good, just have the timing...
Thanks Ryan, I will work on those today.
I have made good progress on the idle. I still have a couple small issues. A warm start flare and the idle hangs after a throttle burp. I may need other adjustments also. I think I am figuring this...
Found the problem. Coolant level was slightly low. The water pump is leaking, new problem. re-filled and temp holds 196 steady now.
While logging for an idle tune I notice the recorded engine temp climbing into the 230 range. The dash gauge reads 210. It doesn't seem as though it is getting hot. I can grab the upper hose and...
wrong post
I have set up my wide band through the egr and it is working as it should, showing on the chart vs time. I have tried to set up a graph for egr error and the it is bouncing around the cells as though...
The IRF table you mention, Is this the injector flow rate table?
Egr switch is on as that's where I have the wide band reporting. I will see if I can adjust the idle timing and move forward from there.
He said stock 6.0 bore. TH 400 reverse manual valve body with trans brake. 9 inch with 4.10. Not sure on converter but feels like 3500 stall. It has a lingenfelter 2 step that is set to 3400. I have...
I have a 2000 firebird with an ls mix. Lq4 block, eagle forged crank, Gen4 rods, Custom 10.5:1 pistons, Lunati 243/259 651/651 112lsa cam, Edelbrock super victor intake, FAST 4150 throttle body, SVO...