thanks Ross,
Sure I will do another log and send it to you.
:cheers: :cheers: :cheers: :cheers: :cheers: :cheers:
Type: Posts; User: UAE_77
thanks Ross,
Sure I will do another log and send it to you.
:cheers: :cheers: :cheers: :cheers: :cheers: :cheers:
Hi Ross,
OK I've done everything, but how do I add more fuel?
Should I go to Engine--> Fuel control--> Power Enrich--> Enrichment Rate--> Add change the numbe to 2.000? Is that correct.
Thanks for...
Hi Ross,
What do you mean by bad mis-configuration for your Trans abuse?
What I've done for my trany is; I took one of my friends file and I took all the performance sitting without the...
hi guys,
I did the scan and I have the file .....but I coud not upload the file to attatch it...Can I have the e-mail address to send you the file...thanks guys
HI MNR-0,
For the TCI : It is TCI part number 378951....
"Pro Super Kits
The TCI® Pro Super Kit is just what it says: a super rebuild kit that contains gaskets, seals, clutches, steels, forward...
Thank you very much MNR-0 :cheers:
I really appreciate your help. When you have a problem and you can not fix and the deallers here they suck big time the hptuner is better than that they use is...
:'( no one there yet :'(
MNR-0, Brh26,Jimeblue,Killer01ws6,Arron, Chris........????Anyone there please help
hi guys,
I posted this massage in the V6 by mistake.....
Please anyone...
Hi guys,
I don't know what is the problem?
When I drive the car full throutel the RPM will slow down at 3000RPM to...
Hi guys,
I don't know what is the problem?
When I drive the car full throutel the RPM will slow down at 3000RPM to 4000RPM then It will be fine.
I did put the factory File and the same thing will...
Guys,
I put my tune on the car 2003 holden, first five min OK, but after that the car will shit on second at 1000 RPM....????Any Idea how to fix it.
Guys,
I took my freind tuning file And the RPM shift set to 6500 RPM....I tried to Change the shifts to 6000 RPM but It wont allow me ?
Any Idea why and how to fix it.
I sold my 2000 Cammador for 2003.......
I put performance Overhul tranny kit....for the first two weeks OK.
But after that the tranny wont respond which I mean....When I'm driving the car On the D...
After I formatted my computer.......I tried to install the HPTuner on my computer but it did not work?
I say you did not purchase the for this vehicle. I'm using the CD?
Please help
I think The sliping is gone........the car run OK now :)
Thanks guys for the help.
ChipMaster locked it for him?
can I unlock it?
Guys,
Can I do this?
1. Take the base shifts pressure VS. Torque VS. Gear from other bin files?
2. How do I increase the unmbers by 10%?
Sorry my question seam silly but I don't like to do any...
Hi guys,
regarding the LTFT and the STFT they are always 0 because I run open lope. Ok so I will try to increase the base shift pressure couple times until I reach 60% just to be in the safe side....
Ok,
So I have to go to => Transmission =>A4TCC => tcc DC VS.Line Press Vs.Trans Temp-Base.....Is that currect
Hi guys how can I turn the SRS light off.
after changing the seats the SRS out not turnoff.
I did the battery disconnect and it did not work
Guys if the PCM is locked is there are any way to unlocked.
My freind car is modified by someone eals and I can not change anything on his car.
Hi guys,
Can you guys tell me is it OK to have too many sensors to be terned off....I did count some of the sensors and they are more than 120?
for example the IAC is turned off ECT
thanks
Sure bro they are in the way.......
hi Guys,
Yes Chris...I don't have O2 sensors and we do run open lope, but I don't have any idea why is this happening?
For the PE Enable %TPS vs RPM
This is for the HOT
64 64 64 64 64 64 64 64...
Guys those are the log files
http://www.geocities.com/ali_alqaedi/Gear_Slips.zip
Thanks WS6snake