Search:

Type: Posts; User: Ranger Coyote

Page 1 of 8 1 2 3 4

Search: Search took 0.00 seconds.

  1. Best tune in the world

    I have a 2016 GT w/ Roush 727 kit and with the only engine changes being ID1050X, Return Style, no cats. You can try my street tune, it's the stock strat (NOT ROUSH)with a 6R80. The speed density...
  2. Replies
    84
    Views
    2,301

    Spark Delta Limiting Function [ECM] 45323 -...

    Spark Delta Limiting Function

    [ECM] 45323 - Knock Sensor SDLF Average Mode: Determines the mode for spark delta limiting function reference average. 0=Middle Values, 1=Minimum Values, 2=Maximum...
  3. Replies
    84
    Views
    2,301

    When I bought my 727HP Roush kit they voided...

    When I bought my 727HP Roush kit they voided parts of my cars warranty but the phase 1 kit only difference was no boost a pump and a bigger pulley and you could keep the warranty. If they let you...
  4. Replies
    2
    Views
    219

    FAOSC with no cats?

    I found a document from ford that said the faosc doesn't even come into the equation until you are 16% off stoich.

    1. Since I have no cats on my car does the FAOSC even work?
    2. Should it...
  5. Replies
    84
    Views
    2,301

    I love this thread... All the best guys on...

    I love this thread... All the best guys on HPTuners picking apart a "perfect" ford tune... Who knew it would be so fun to look over logs from an unmodified car?
  6. Replies
    84
    Views
    2,301

    I just got brand new id 1050x and they are not...

    I just got brand new id 1050x and they are not showing good results.. my ID1000 were better
  7. Replies
    3
    Views
    142

    You can add credits later very easily if you find...

    You can add credits later very easily if you find you don't get enough. You probably need two credits to start out. I ended up using 4 credits because I licensed a strategy I didn't have with a...
  8. You are correct in all your assumptions. If you...

    You are correct in all your assumptions. If you were to want to use one of the tables you mentioned, you must edit the axis values to have realistic rpm ranges
  9. Replies
    84
    Views
    2,301

    It looks like the valves are doing a pretty good...

    It looks like the valves are doing a pretty good job of following the optimum power valve settings.

    108833

    If you want to split hairs you could raise the low slope and high slope a tad...
    ...
  10. can you hear any air sucking noises under the...

    can you hear any air sucking noises under the hood? I know it's hard to hear but it seems like a vacuum leak could be something to look for. I can't imagine your fuel to be that far off with just a...
  11. Replies
    5
    Views
    220

    There is another thread going on with some...

    There is another thread going on with some problems you might read... Looks like bad news: https://forum.hptuners.com/showthread.php?75763-EEC-V-and-VCM-Scanner
  12. Replies
    6
    Views
    135

    I'm not sure if there are limiters in the trans...

    I'm not sure if there are limiters in the trans that you can't access. There is a fuel cutoff under Fuel - Cutoff, DFCO, change the Cutoff RPM, Temp RPM and ETC RPM, I usually change the MAF fail...
  13. Replies
    6
    Views
    135

    Helps a bunch to have the tune, thanks for...

    Helps a bunch to have the tune, thanks for posting. Yours will use the "Borderline Knock" table as your base spark, it uses the MBT table as an upper limit and the Cylinder Pressure is the absolute...
  14. Replies
    6
    Views
    135

    You have to locate which mapped point it uses...

    You have to locate which mapped point it uses under full load. It could be optimum power table, complete guess without looking at your tune.

    108802
  15. Replies
    56
    Views
    9,901

    Before long you might not be able to tune cars at...

    Before long you might not be able to tune cars at all... Re-sell what you got, HP Tuners made nothing on the equipment they sent you... I understand why you are mad but these guys are the only ones...
  16. Replies
    5
    Views
    220

    you have an idle log to go with the tune?

    you have an idle log to go with the tune?
  17. Update: It works, my calculated map now matches...

    Update: It works, my calculated map now matches my actual map almost perfect... no more weird fuel spikes and stuff... THANK YOU MURFIE!
  18. stock injectors? does it have e85 in it or...

    stock injectors? does it have e85 in it or something?
  19. The Pro link i was talking about is what you need...

    The Pro link i was talking about is what you need to log external sensors. It's awesome check out this pic i made earlier working on a transform formula:

    108799
  20. I changed everything over to inHg and used the...

    I changed everything over to inHg and used the formula from your spreadsheet to convert the voltage directly. Appears to be working!! I'll remove some of the extra pids and go try to fill in my SD...
  21. The only regrets when I first started is I didn't...

    The only regrets when I first started is I didn't think I would ever do external sensors and stuff... Get the whole thing first go! MPVI2 w/ Proset & Prolink cable and you won't kick yourself later.
  22. Replies
    2
    Views
    295

    You are probably talking about Decel Fuel Cut...

    You are probably talking about Decel Fuel Cut Off, DFCO. Change the settings in red and you'll get popping when you let off the gas.

    108779
  23. Thanks Murfie! I found this sheet when I was...

    Thanks Murfie! I found this sheet when I was trying to figure out how convert voltage. Has the formula right at the top

    108776
  24. External MAP and SD Calculator transform + maths issue

    I'm trying to fine tune my SD tables. The problem I'm having is the AEM Map sensor is measuring pressure and vacuum and the SD calculator wants just positive values. I tried to add the Barometric...
  25. The 2008 F150 I looked at has idle RPM settings. ...

    The 2008 F150 I looked at has idle RPM settings. Post your tune so we can help you.

    108730
Results 1 to 25 of 184
Page 1 of 8 1 2 3 4