Search:

Type: Posts; User: Hemituna

Page 1 of 12 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    39
    Views
    8,431

    You cant crash the valves, it is physically...

    You cant crash the valves, it is physically impossible in a stock engine.
    Do try the changes you have made, but it will drive worse than std....well now you will know to maybe try another direction...
  2. Replies
    22
    Views
    1,768

    On the DOHC engines, the numbers represent actual...

    On the DOHC engines, the numbers represent actual lobe centre position of each cam.
    It will idle with exh fully advanced and intake fully retarded...Whether you want it advanced or retarded after...
  3. No, but have just helped a guy with one...he used...

    No, but have just helped a guy with one...he used my changes except for those injector/ fuel related.
    Reported that it drove amazing after changes so maybe try same.
  4. Replies
    8
    Views
    235

    A looser converter will be better with that cam.

    A looser converter will be better with that cam.
  5. This is one of my current edelbrock/magnuson...

    This is one of my current edelbrock/magnuson tunes for JK 3.6 auto.
    It runs our std set-up (80mm TB, Air tube and filter, 3 inch free flow exhaust)
    Feel free to use as a guide, transfer in its...
  6. Replies
    8
    Views
    235

    Take cam out, put blower on...problem solved and...

    Take cam out, put blower on...problem solved and it will go faster. :)
  7. We build em with half the specified p/b clearance...

    We build em with half the specified p/b clearance and the knock sensors work nicely again.
    On pull down the pistons look perfect...zero scuffing.
    Not much help in your current case but for future...
  8. Thread: Misfire P0300

    by Hemituna
    Replies
    17
    Views
    560

    Broken ring lands generally show-up as a P0300...

    Broken ring lands generally show-up as a P0300 before soon becoming very obvious :(
  9. Thread: No lift shift

    by Hemituna
    Replies
    7
    Views
    306

    Yeah true....young crims probably cant even drive...

    Yeah true....young crims probably cant even drive a manual these days...:)
  10. Thread: No lift shift

    by Hemituna
    Replies
    7
    Views
    306

    Not much help, but please stop buying manuals :)...

    Not much help, but please stop buying manuals :)
    New auto trans are so good that you couldn't give me a manual anymore...
  11. Replies
    31
    Views
    970

    Use the 6.2 WOT numbers with the 9 deg offset....

    Use the 6.2 WOT numbers with the 9 deg offset.
    Transpose those same numbers into PT tables...The cam will now only move a few degrees
    Blown engines work way better like this.
    The crazy PT numbers...
  12. Replies
    31
    Views
    970

    There is not, you are going to have to use your...

    There is not, you are going to have to use your brain :)
  13. Replies
    40
    Views
    1,811

    Same, I have many guys that have done literally...

    Same, I have many guys that have done literally thousands of 1/8th & 1/4 mile passes over the last 3 seasons on 1000+hp cars with the ZF and trans is still golden.
  14. Replies
    31
    Views
    970

    You get same numbers because it doesn't know you...

    You get same numbers because it doesn't know you have changed the cam grind.
    So you have to work backwards from full advance.
    On the 6.2 it is 134 but on your 5.7 it thinks full advance still is...
  15. Replies
    40
    Views
    1,811

    Correct You can get really fast and firm shifts...

    Correct
    You can get really fast and firm shifts by shortening shift times/delays/ramps but it will need TM to work properly.
    If you are making a ton of power it may even need more TQ reduction to...
  16. Would like to see your finished Prodigy tune just...

    Would like to see your finished Prodigy tune just out of interest....post it up.:)
  17. Replies
    13
    Views
    496

    Its called Beta for a reason........

    Its called Beta for a reason........
  18. Replies
    40
    Views
    1,811

    Yes, there is heaps to be had especially when you...

    Yes, there is heaps to be had especially when you have added power.
    Most tuners haven't spent the time to understand and control how it is used.
    Think of it a like putting a really skilled driver...
  19. Replies
    40
    Views
    1,811

    Welcome back to 1970 Here in nearly 2020, we...

    Welcome back to 1970

    Here in nearly 2020, we use tq management to go faster

    Tune it a little, don't disable it.
  20. Thread: Can timing

    by Hemituna
    Replies
    25
    Views
    2,899

    Start with Ken&Jenns numbers' for WOT tables and...

    Start with Ken&Jenns numbers' for WOT tables and make P/T same also.
  21. 1. You won't damage the trans by moving the TCM...

    1. You won't damage the trans by moving the TCM limit...it is just an rpm limit to prevent the engine over revving in any gear or downshift situation.
    2. You wont damage the engine by raising the...
  22. Replies
    2
    Views
    443

    Try using the DD flywheel power table (34542) to...

    Try using the DD flywheel power table (34542) to get the pedal/response feel you want.
  23. Thread: Whipple

    by Hemituna
    Replies
    7
    Views
    761

    Don't bother chasing whipples tune, it is beyond...

    Don't bother chasing whipples tune, it is beyond basic.
    Try third tune posted by Coanan, will make an ok starting point.
    Forget the other 2.
  24. Thread: Wot ??

    by Hemituna
    Replies
    3
    Views
    258

    It is showing a percentage of the sensor...which...

    It is showing a percentage of the sensor...which is 0-5v
    The 84% is 4.2v and the TB is fully open at 3.8v.
    So, yes - you are @ WOT.
  25. Replies
    9
    Views
    705

    Don't drive yourself crazy chasing perfect fuel...

    Don't drive yourself crazy chasing perfect fuel trim numbers especially on cammed engines.
    With plenty of overlap, the 02 sensor is often getting false info anyways so is least accurate low in the...
Results 1 to 25 of 295
Page 1 of 12 1 2 3 4