ok so this is what i have. 133820 do i still want to copy high octane to low octane table? also just curious is there anything else i should do since i deleted the EGR and rear o2 sensors other than...
Type: Posts; User: Kochan05
ok so this is what i have. 133820 do i still want to copy high octane to low octane table? also just curious is there anything else i should do since i deleted the EGR and rear o2 sensors other than...
ok so from i undertstood to enable SD i turned MAF codes to NO MIL LIGHT. copied high octane table to low octane table, and unplugged MAF so it falls to SD. so if i need MAF plugged in for IAT then i...
k so i tuned it to run on speed density, unplugged MAF and started it up. it doesnt seem to be misfiring anymore so im happy about that. but it kinda seems like its running a bit rich still which i...
Ok I will give that a try thanks for the help
So I tried unplugging the MAF and it wouldn?t even hardly run. Reading -40 and just dumping fuel
im not really sure how to do that im just a beginner when it comes to tuning. looks like the IAT is sitting at 22 Celsius , and the ECT started at about 80 on startup and got up to 145 Fahrenheit. i...
Yea they are plugged in correct. Couldn?t really plug them in wrong the way the harness is.
Oh ok well I don?t think so cause I haven?t done anything to it. Drove it last year and got it going the other week and it was fine
Yea they are plugged in.I just drive it a week ago didn?t do anything to it. Maybe a bad sensor?
Not sure what is going on here im getting random misfire. it seems like it is running rich, smells like gas ive swapped coils, plugs, wires, and injectors doesnt seem to move the misfire. its a stock...
also had all the injectors out and tested them on the bench
i tested them all with a noid light and they all seemed to be pulsing fine. but in the data log the pulse width is extremely high. not sure why
ok. i hooked it back up but as soon as i start cranking fuel just starts pouring fuel from the header, and i mean pouring!
posted tune file. i have coolant temp sensor hooked to gauge in the truck that's why its unplugged
I need some help here. Trying to get my truck running, its a 94 c1500 with an 03 lq4 and 2wd 4l80. Motor is a complete stock rebuild, has stock tune with vats deleted right now. It wants to start...