yes. There are other settings that can override it and force an upshift or not allow a manual downshift though. I forget their labels, but you should see settings in the shift scheduling tab that...
Type: Posts; User: sgtbilko
yes. There are other settings that can override it and force an upshift or not allow a manual downshift though. I forget their labels, but you should see settings in the shift scheduling tab that...
That's for the E38 ECM and I have E78, so it won't work for me. Sounds great for anyone with E38 and $600 to spend on it. Thanks for adding the info!
Searched forum and elsewhere and can't seem to get a good answer on this:
How Many Credits to Calibrate Speedo on 2017 F150 10-Speed 3.5? A friend changed his tire size.
Thanks,
D
and I'm happy to help anyone one-on-one if you can handle 90% of it on your own. Just message me and mention TUTD.
6 Speed Auto TUTD without BCM and without Corvette tune.
This is a Microsoft Word document with very easy and clear instructions for you to enable the Tap-up/Tap-down (TUTD) function on a 6L80e or...
I'm using version 4.4.4. When you click on the "Normal" button do you get the chart for "Upshift Speed vs. TPS vs. Shift - TUTD"? If not, dig around til you find it. It might look like the chart...
I know nothing about the G8 shifter but I did try using the tapshift buttons from the van donor that supplied the motor and transmission for my swap. It was just a resistor tree powered by 12V but...
Is there a way in Scanner to see if/when the converter clutch is being commanded to lock?
97485
Here's a tutorial I put together in Word format.
It worked for me; 2016 L96/6L90e/No BCM/NOT using Corvette tune.
Well if all else fails, perhaps I can figure out how to send that "message". Arduino maybe...any idea where to find a copy?
Seems the cruise control and Tap-shift systems run through the BCM as...
If I missed the answer in my search, please just help me find it.
I have a 2016 L96/6L90e with the E78 ECM and no BCM (swapped into a Squarebody truck).
Anyone know how to wire up the...
Higgs Boson
You sound like the guy to ask where I might find a guide for VVE/MAF tuning the E78. Got any suggestions on a beginner's guide? Thanks
I'm considered a smart guy in my circles but perhaps not smart enough. What am I missing? I see nothing in that link that clues me in on how to tune my MAF to a larger intake tube.
Can you steer me in the right direction to find a guide (in HPT forums or elsewhere) on tuning VVE/MAF for E78? Searched the forums and I didn't find one. Thanks
I case you didn't see it, I edited the original post to reflect that the problem was fixed with an old tune but I don't know what parameter was the culprit.
I got the graph figured out; had to log "MAP/Baro (Pressure Ratio)" instead of "Manifold Absolute Pressure".
91948
91949
I followed the guide you linked, attached tune and log files.
Something ain't right about the graph. It's logging only the 1.02 line so I cut the trip short. Could that have...
I have no idea how to tune MAF/VVE. I guess I'll be doing some more reading. I have the MAF Calibration/Airflow vs Frequency multiplied. With the "MAF calibration restrictor" installed in the MAF...
Intake is 4" cold air, so yes it's larger.
No idea how
a couple stumble/backfire going stabbing the throttle from cruise. 1st log around 4:45ish and second log around 9:00 or 9:15ish.
91915
91916
91920
91917
Made the changes you suggested. Attached before/after tunes and logs.
ok will do that. gotta knock out a couple errands. about to write the tune now. thanks
I did go back to stock timing tables along with the other items u mentioned but haven't written to ECM yet. Found knock threshold, thanks.
The Airflow Cylinder Charge Temperature Bias table has never been touched. I dunno how they are butchered unless it's part of the changes that the gear wizard makes. Nonetheless I pulled up the...