Search:

Type: Posts; User: c0ke

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    159

    definitely possible, add as much more to the log...

    definitely possible, add as much more to the log as possible, helps a lot with diagnostic
  2. Replies
    1
    Views
    89

    auto or manual? post tune

    auto or manual? post tune
  3. Replies
    1
    Views
    71

    https://www.hptuners.com/vehicles/ Not on...

    https://www.hptuners.com/vehicles/


    Not on the list
  4. Replies
    5
    Views
    159

    Have you tried pulling timing and seeing if it...

    Have you tried pulling timing and seeing if it gets rid of it? some areas have an extra 10 degrees over stock otherwise thinking maybe it has to do with your injector settings
  5. try unplugging mpvi from obd and unplugging cable...

    try unplugging mpvi from obd and unplugging cable from mpvi and cable from laptop then connect them all again 1 by 1.

    make sure you have a charger on the vehicle

    also open a support ticket for...
  6. Replies
    5
    Views
    159

    post tune, I don't think 50 degrees of timing is...

    post tune, I don't think 50 degrees of timing is helping your issue.....
  7. This. Which is under the torque management...

    This. Which is under the torque management section.

    But what do I know :)
  8. Yeah looks very familiar to those 07 C6 Z06...

    Yeah looks very familiar to those

    07 C6 Z06
    E38, GM Gen4 V8
    OS: 12614676 -> 1250213
    Speed Density - 2 bar
  9. Lots of areas in the torque management section...

    Lots of areas in the torque management section need work....

    Watch logs and play in that area till you fix it :)
  10. Yes

    Yes
  11. 1 lambda unless otherwise adjusted.... I'm...

    1 lambda unless otherwise adjusted.... I'm telling you there isn't much if anything that hptuners hasn't covered for the m156
  12. Need to log a lot more to know what and where to...

    Need to log a lot more to know what and where to adjust.... Needs some fuel and maybe a tad less timing or the knock sensors dialed in for headers, I would recommend doing some more research and at...
  13. Not worth it, hptuners already has all the tables...

    Not worth it, hptuners already has all the tables necessary in the m156 for an excellent quality tune
  14. Car won't start on first try.. Always on second

    Hey guys having a super weird problem. I have a C6 z06 with odd issues so I'll try and explain them my best.

    First off, with hpt plugged in I couldn't cycle the ignition on without getting key...
  15. hptuners doesn't work much like the european...

    hptuners doesn't work much like the european software where you just set lambda targets and be done with it, you actually have to log AFRs and tune the maf when using hpt for the m156. The only...
  16. Replies
    2
    Views
    267

    Thank you, I ended up figuring out it was the...

    Thank you, I ended up figuring out it was the driver demand table, I wasn't logging one of the pids I needed to see that
  17. Replies
    2
    Views
    267

    exhaust temp limiter

    I can't seem to find out what's limiting this car above 5500 rpm. Trying to get the hp to go up with rpm but keep getting limited

    here's the log and file
  18. Thread: 2013 a45 amg

    by c0ke
    Replies
    2
    Views
    291

    what suite are you using? newest beta is required...

    what suite are you using? newest beta is required for this
  19. Replies
    9
    Views
    849

    email support. Goodluck

    email support. Goodluck
  20. Thread: Failed Erase?

    by c0ke
    Replies
    5
    Views
    496

    make sure ignition is on and obd plug is in...

    make sure ignition is on and obd plug is in properly... I've had this when one of those is occurring
  21. Replies
    5
    Views
    543

    I'm having this issue on a 2018 ecoboost mustang...

    I'm having this issue on a 2018 ecoboost mustang with mpvi1 bought straight from the dealer and no tunes on it. It wont even detect ECU
  22. Thread: Tricore Mercedes

    by c0ke
    Replies
    15
    Views
    2,293

    Will we be able to mod these ecus ourselves to...

    Will we be able to mod these ecus ourselves to use with hpt?
  23. Replies
    4
    Views
    574

    The idle is too low and that makes it not idle as...

    The idle is too low and that makes it not idle as smooth as it should with the added possibility of stalling, raising the idle will even it out and reduce the violent gear shift it'll also prevent...
  24. Replies
    4
    Views
    574

    Timing bouncing around is normal, your idle is...

    Timing bouncing around is normal, your idle is way too low and your low octane map looks fubared, make the low & high octane maps the same until you are done and then subtract a few degrees from the...
  25. 13 C63 Error when trying to rear arguement out of range

    Trying to read a C63 and keep getting this message then vcm suite doesnt work if I continue or closes when I hit quit



    See the end of this message for details on invoking
    just-in-time (JIT)...
Results 1 to 25 of 39
Page 1 of 2 1 2