Search:

both MPVI and MVPI2 will work fine on the 2012 Mustang GT assuming the previous tuner didn't tunerlock/scramble the os.

Absolutely yes it should, please open a support ticket for one on one assistance for this issue.

Please open a support ticket so that we can assist you one on one.

Red error light would indicate a internal failure of some sort, I would recommend contacting hptuners support for further 1 on 1 assistance.

Just install the software & MPVI2 drivers, resync the MVPI2 & tune away

Yes you can, the MPVI2 is not tied to a laptop/pc.

Please open a support ticket and include the .hpt file in question in the ticket so we can assist you 1 on 1.

sounds like you wrote a file from a newer E38 to an older E38 or vice versa, this will corrupt the NVRAM as outlined here http://www.hptuners.com/forum/showthread.php?t=28327

your app key is posted on your devices page instantly via our automated system, no need to wait for an email.

off the top of my head I don't believe so. I could be wrong though as I've never personally used master/slave.

We support the ECM for your application. Not sure about the TCM, would need a read from the vehicle in order to determine TCM support.

allows you as a shop to send back a file that you are the master and they are the slave and are unable to open the file but they can license & flash the file.

Outlined here...

Keep in mind the 98 ecm's don't store the vin in the flash, it is separate and why any .bin file from a 98 Camaro/Firebird won't have a vin number in it as its not there in the flash.

4.8 is the newest public software

Your devices page will tell you if the pro feature set has been purchased on the device.

https://www.hptuners.com/my-account/hpt-mydevices-endpoint/

What is the serial number of your device finch?

With that said if you want to UPGRADE to the year/model license just open up a file that falls in the year/model license you want that you haven't yet licensed. For instance if you want the 2000...

You only get one chance to license a file and that is at the initial flash.

Yes, for MPVI2 it will ask you to license the file at the initial flash, this is your opportunity to choose the license you want ie single vcm, year/model or unlimited gen license.

Please open a support ticket so that we can assist you directly in this case.

vats cannot be disabled using our product on these ecm's, sorry.

Jim would be the one to contact, we do not sell the ngauge, I don't think anyone sells them anymore so I'm not sure how much support for them( ie unlocking) is actually out there for them now as...

check out our ford section for starters https://forum.hptuners.com/forumdisplay.php?18-Ford-Tuning-Engine-Gas-(Non-Ecoboost-US)

You can purchase the MPVI2 device here which is what you'll need to...

Unfortunately not supported at this time.

You can find our full lineup of supported vehicles here https://www.hptuners.com/vehicles/