Search:

Type: Posts; User: f.creek-ranch

Page 1 of 20 1 2 3 4

Search: Search took 0.00 seconds.

  1. Look into a 2021 5.7 charger tune and it can be...

    Look into a 2021 5.7 charger tune and it can be set.

    Have you pssed the emission questionaire from HP ?

    At this time I try to figure out the same. If I set SRV equipped to enabled then AlfaOBD...
  2. Replies
    3
    Views
    77

    Long tubes, cats and exhaust let the boost gets a...

    Long tubes, cats and exhaust let the boost gets a little down. The 5.7 with stock internals isnt very durable under high boost....and thats what Whipple try to avoid, I think.

    I already have...
  3. Why you dont talk to us ? Say what engine or...

    Why you dont talk to us ?

    Say what engine or PCM, send the file...no one ?

    Youve got a multiplier and a factor...
  4. Replies
    15
    Views
    917

    Little update... If I disabled the SRV...

    Little update...

    If I disabled the SRV Equipped switch in HPTuners, the SRV test in AlfaOBD will not be functionally.
  5. Replies
    1
    Views
    95

    I try to figure out this problem for a long time....

    I try to figure out this problem for a long time.
    Long story short....its not the cold start fueling, not the transient, not the fuel trims, not the cam position, I try them all.

    At this time I...
  6. Replies
    15
    Views
    917

    I correct all the base tables, the values in the...

    I correct all the base tables, the values in the rows will not change by engine displacement.
    But I try to figure out, if it s possible to change engine displacement in the stock pcm and...
  7. 5.7 to 6.4 swap- Displacement Setting on 5.7 pcm

    I know I?ll get an ABS code if I change the displacemet setting from 5.7 to 6.4.

    But the ABS module is the same in both cars.

    So I wonder, if anybody has tried to initialising the ABS with...
  8. changing ANN learning to max 119 exhaust away...

    changing ANN learning to max 119 exhaust away from the 125 exhaust deg in idle and it does not help...

    even change rpm min and ve min in training values from ANN higher to get out of the training...
  9. Replies
    16
    Views
    5,997

    What I know is, that the 3 Bar is not working...

    What I know is, that the 3 Bar is not working correctly with non HC PCM?s
  10. Replies
    2
    Views
    129

    And so we need both tunes....

    And so we need both tunes....
  11. Replies
    5
    Views
    184

    Maybe you should start with a stock tune again...

    Maybe you should start with a stock tune again...
  12. Replies
    5
    Views
    184

    Your MAF is way off at idle. Fuel Trims are...

    Your MAF is way off at idle.
    Fuel Trims are swinging.

    Maybe your airflow table doesnt fit to the cam.
    Maybe the phaser isnt right in place.

    Your tune is needed...
  13. To be in the right range act like this : Raise...

    To be in the right range act like this :

    Raise every cut off or maximum the same value , maybe 500 rpm more. Dont zero the rpm limit torque reduction out - dont make sense, so leave it like it is....
  14. Tuning isn’t easy, like watching a video. The...

    Tuning isn’t easy, like watching a video.
    The pcm - especially Dodge - has lots of pitfalls.
    Every thing leads to another.
    You want later upshifts ?
    First raise the rev limiter of the engine.
    It...
  15. there is a lot of space for improvement. try...

    there is a lot of space for improvement.

    try to deactivate all Auto Trans Tq Mgt (w/o use spark A) and deactivate Upshift Torque Reduction to see how it feels.

    If its OK, set Fill Time a little...
  16. The common problem is the missing powerband of...

    The common problem is the missing powerband of the 5.7.
    the purpose is to keep the 5.7 behind the 6.4.
    If you want to get in better powerband at gear change, you have to replace the cam.
    Above...
  17. Replies
    3
    Views
    187

    if, then vcm scanner.

    if, then vcm scanner.
  18. Try startup inj pw- startup base and set ms on...

    Try startup inj pw- startup base and set ms on hot a little higher for a test.
  19. No matter what…it starts with dialing in...

    No matter what…it starts with dialing in injectors…..always.

    Airflow doesn’t fit with performance cams…never, even idle speed….

    If the basics fit you can easily do the rest.
  20. The ANN is a big piece of xxxx. Always tune...

    The ANN is a big piece of xxxx.

    Always tune injectors first to get the right fueling, otherwise you correct the wrong inj data with VE.
  21. Next step, I will try to set ANN learning from 83...

    Next step, I will try to set ANN learning from 83 to max 119 exhaust and see wha will happens at idle and cold start.

    There must be a way to get rid of this problem, without setting cam out of...
  22. The problem seems to be the ANN and VVT. After...

    The problem seems to be the ANN and VVT.
    After installing a 6.4 shifter cam in the 5.7 auto on a Challenger, the cold start gets lean and the ltft shows -10 until the O2 kicks in.
    Because the new...
  23. do a fuel reset, I dont know why, but HPTuners...

    do a fuel reset, I dont know why, but HPTuners isnt able to do this in the scanner...lol.

    then dial in your injectors with ann.

    after this you can set your ve table.

    i miss throttle % in...
  24. Replies
    15
    Views
    533

    U have O2 sensor engine diagnostic disabled....

    U have O2 sensor engine diagnostic disabled.
    with diagnostic on, the pcm would tell you problems about the sensors.

    there is no signal, so if the sensor and wire works, the pcm will be bad.
    So a...
  25. Replies
    2
    Views
    215

    send you a PM. Use the 6.4 MDS values, the...

    send you a PM.

    Use the 6.4 MDS values, the shifter cam I hve used in mine is different.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4