Yes calibrate with this table set to stock, then change it after your happy with the calibration.
--Christian
Type: Posts; User: CDNITE
Yes calibrate with this table set to stock, then change it after your happy with the calibration.
--Christian
Thank you so much Eric!
I am very excited for this!
--Christian
Did this get anywhere?
What about the E-92 ECU for the LTG Crate Motor?
--Christian
Could this ECU be used in A Kappa or Delta car with the factory stability control?
--Christian
DFCO does increase fuel economy, Bosch designed the stratified DFCO table for cylinder cooling and help maintain turbine speed.
Spraying fuel in alternating cylinders very 720* cycle cools the...
Perhaps the DFCO? Have you verified throttle blade position?
Thanks for adding to my post I should have included the formulas.
The delta in precision decreases with more points, but using 10 would also show you if the slope is linear or if there are areas...
I would recommend calculating the actual Linear and Offset values of your sensor and not just using the product data values. Actual can be a good bit off and changes over time.
Build a PVC...
I would recommend calculating the actual Linear and Offset values of your sensor and not just using the product data values. Actual can be a good bit off and changes over time.
Build a PVC...
Its most likely the throttle body squeaking, it will cycle at start up to control the idle until the cam switch to the warm (open loop) mode.
--Christian
Eric can you please give us an update?
--Christian
OK let me know if you need reads. We have a meet the first sunday of every month and I could get you a bunch off reads at that time.
Actually if you need reads off any models let me know hundreds...
Eric, the Focus market is screaming for a custom tuning solution. Any idea when HPT will have support?
--Christian
Update on the Focus ST?
Any update on this?
Is the Focus ST available yet?
The stock motor was not designed to be raced... it is a street car. Racing "once" is hard driving!
Any time you exceed factory power levels you are stressing the design beyond the threshold level...
I just look through the tune.
Its extremely mild, mostly just a boost increase with a tiny bit less ignition timing and midrange cam power band instead of the factory efficiency band, and CAT low...
What about 2012 Challenger TCM support?
Thank you for this info, thats exactly what I was looking for!
One last question how does the WiFi connection with the iOS device work if I'm also trying to use the GoPro WiFi? Do I need to setup...
I know the Bluetooth OBD2 interfaces have different chips and features, which one has the best performance for this App on the iOS products?
Also, is there an iOS product that it works better or...
Is the Focus ST 2.0L EcoBoost supported in the newest beta?
I never got any codes or CELs when I ran my lopey idle.
An interesting artifact that does happen with it is 3 out of 5 times I load the same tune file the cams won't move out of the parked idle...
Maybe drop a link for those interweb is not strong with.
Last time I remember I played with the Cams and the forum went down this road, it was determined that there are still cam controls that aren't unlocked with HPTuners. Like the cam HPFP lob count. It...