Search:

So share what you found to help others...

Yes TCC works, thank you. 1 issue fixed,1 to go.
Do you have an idea on what to look at for the load % showing so low compared to the other PCM? How does a gen 3 calculate the load?

Thanks for the information & direction. Just to be sure because this is my first tune & had to do a PCM swap here is the changes I made.144920

Thanks TransGo Robert for your reply. I took your advise from the Transmission Brotherhood post I made the other day. I made some logs with engine data and posted it here, I didn't think to add the...

I LS swapped an S10 with a 2004 Trailblazer/SSR LM4 engine & a 2002 CHD 4L60E. It has an Elgin E-1839P camshaft. I bought the custom wire harness, PCM & a start up tune from CPW. They sent me a 2005...

I know the crank relearn can be done. In the VCM scanner while hooked up to the vehicle. Go to the "Vehicle" drop down menu and choose special functions. Each vehicles OS has different "Special...

I appreciate your expertise. I guess I'm just ignorant of several small details that could be why its not working as I believe it should.

Thought that I spelled that out in post 1 if not I just...

I have the older GM 4-wire set up.
Yes that is what I was attempting to find out. That was one of my original questions in post #1 question 1 & 1A.

137421

C2-74 green is actually the BK2-S1...

This is exactly the root issue I'm trying to get to.

So if I understand it correctly I need to find a 2004 S10 V-6 PCM from a salvage yard and start all over from there.

Nobody has still...

Thanks for the suggestion. That appears to be for using a 2005 & later model 2 pin RVC alternator.

I'm dealing with the AD244 style 4 pin.

I think the key in this is in the tune file. Can you...

HPTuners responded to my 4th question about licensing. They stated that in VCM editor go to Help>licensing information. Here is a screen shot of mine.

137334

Because I have so little experience...

Blindsquirrel, you are correct in this has been posted about before and I stated that up front. I also took your advise from the previous post about this... and decided to start over month's ago with...

As stated above it was tested and the lamp circuit was tested. It passed both tests. 14.5V @ 36amp output after a startup...

I got my truck back from the body shop and I can come back to this battery light issue.
I submitted a ticket to HPTuners and they suggested that I re post this issue.
I am LS swapping a 2000 S10...

PM sent, I have it but it wont let me upload it here.

I have a 2000 S10 LS swapped with an LM4 from a 2004 Trailblazer. My fuel gauge reads backwards. I compared your fuel system #'s to mine and it was 98% identical. I made those two changes and got the...

Spoken like a true transmission GURU!! Thank You I could not have done better!!

Sonnax Front planet set is about $700...

These guys are great, I just think it's hard for them to relate to the newbie mind set. I know I do when I talk about transmission rebuiding...

I have only had HPtuner since last Sept. I found...

Look at shift's in 2 separate aspects.
Shift speed is it early or late on the MPH scale.
Then you have shift feel, short & long. Short & crisp or harsh. long and soft or long with a cut loose....

Bigger cams cause the P0300 code for Random Misfire. The cam lope causes the engine idle to speed up and slow down from cylinder to cylinder. That is how misfires are detected. the cam lope is very...

I'm still a novice at tuning. I mean no offense, I would like to understand your statement better here. The reason I said that the log is missing some channels is:
He is doing some idle tuning and...

Your scan is missing channels so here is 2 suggestions.
1) Start here and study this thread....

"MHK5

I assume you knew to "write entire" after you turned the VATS off? I've made that mistake before. It would crank, fire then immediately shut off."



This is good to know, but I was...

It runs on the old tune...

I took the 12580681 injector data and put that in the new tune. I didn't change the LTFT data because it was minimal differences.