yea car starts now. i think it was a mix of the tune/CPS.
Type: Posts; User: dmw319
yea car starts now. i think it was a mix of the tune/CPS.
TTT. tried a new PCM and ICM and crankshaft position sensor and still nothing... car wont even turn over.
thanks for the info!
1997 3.8L V6 Camaro, FFF T-70 Turbo setup, 3500 Stall, XP Hot cam. more here: www.savedalone.com/camaro
ttt..
anyone? :pray:
searched and couldnt find anything. what is this code referring to and what does it mean? thanks
also i was getting the p0121 code but changed my max and min to 100 and 0 so now that went away. i read a little bit on how having a cam can sometimes effect that tps 0121 code.. i could try another...
anyone?
i just emailed HP Tuners support...
also, with the key on.. the MAP reads 101... then when you start the car it goes to a random number like 65 or 90.. and just stays there until you turn the car...
(97 3.8L turbo camaro)
My MAP sensor is not reading in HP Tuners it just sits at a constant value and doesn't move at all. I tested the sensor with a voltmeter and it read and worked as normal....
no i didnt know where they were. thanks for your help!
coudl you explain what you mean a little more? or how id go about to fix it? thanks
anyone..?
(For a 97 v6 camaro):
a few of the items show (-) numbers and i heard there is a special formula you have to insert into those areas to get them to read (+) numbers. like fuel trims, timing, etc...
the wideband is in the end of the y-pipe, right after the pipes join. and its not an exhaust leak. im not impressed with the LC1 so far.
uggggh
its a brand new sensor :(
why would by LC1 be reading like this? (up and down choppy, not smooth)
www.savedalone.com/camaro/lc1error.JPG
its weird, i dont change ANYTHING and sometimes it works fine, and others it just...
works now!! thanks!
yes i have EGR position in the table, and thats what my regular AFR error looks like, but i guess ill try adding another custom one that looks identical??
i am also having this problem. i cant see histo 5 and 7. can someone post their custom PIDs so i can copy them to see AFR %error and also, i cant see my MAF (Hz) either... weird. it is in my table...
i am also having this problem. i cant see histo 5 and 7. can someone post their custom PIDs so i can copy them to see AFR %error and also, i cant see my MAF (Hz) either... weird. it is in my table...
i dont have an EIO, doh! just realized that.. haha